ABB 3HAC25724-001 Cable Harness – IRB14000 YuMi Spare Part

Model: 3HAC25724-001

Brand ABB Robotics
Model 3HAC25724-001
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

ABB 3HAC25724-001 Cable Harness – IRB14000 YuMi Spare Part

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.

The 3HAC25724-001 cable harness is a structural-electrical component routed through the IRB14000's dual-arm body. Its failure is not a minor inconvenience — it is a production stoppage event. DriveKNMS maintains RFQ-reviewed sourcing status of this part to give plant engineers and maintenance managers a direct path back to operation without triggering a capital expenditure review.

Technical Specifications

Part Number 3HAC25724-001
Description Cable Harness
Compatible Robot ABB IRB14000 (YuMi)
Manufacturer ABB Robotics
Country of Origin Sweden
Part Category Internal Wiring / Signal & Power Harness
Application Dual-arm collaborative robot internal routing
Part Status OEM Spare – RFQ availability review; sourced from verified channels

Note: Electrical parameters specific to this harness assembly are not published in ABB's public documentation. DriveKNMS does not fabricate specifications. All technical verification is conducted against the physical unit prior to shipment.

Solving the Discontinued Hardware Crisis

The ABB IRB14000 YuMi was introduced as a purpose-built collaborative robot for small-parts assembly. Its compact dual-arm design and integrated safety architecture made it a preferred platform for industries where human-robot collaboration is operationally necessary — not optional. Many facilities that adopted YuMi cells in the 2015–2020 window are now entering the phase where original internal components require replacement due to cumulative wear, cable fatigue, or connector degradation.

The 3HAC25724-001 harness is not a commodity item available through general electrical distributors. It is a robot-specific assembly, routed and terminated to match the IRB14000's internal geometry. Substituting with a non-OEM harness introduces signal integrity risk, potential EMI interference with the robot's internal sensors, and — critically — may void the robot's safety certification under ISO 10218 and ISO/TS 15066 compliance frameworks.

For plant managers facing pressure to retire aging YuMi cells, the arithmetic is straightforward: a verified OEM harness replacement at a fraction of the cost of a new robot unit extends the productive life of the asset by 5 to 10 years, preserves the existing safety validation, and eliminates the retraining and re-integration costs associated with platform migration. The decision to source a critical spare is not a maintenance expense — it is an asset protection decision.

Condition & Reliability Assurance

DriveKNMS applies a 5-stage inspection protocol to all cable harness units before dispatch review:

  • Visual & Physical Inspection: Full examination of jacket integrity, connector housings, and strain relief points. Any unit showing abrasion, kinking, or connector deformation is rejected.
  • Connector Pin Inspection: Each connector is inspected under magnification for corrosion, pin recession, and oxidation. Corroded contacts are a primary failure mode in aging harness assemblies and are treated as a disqualifying defect.
  • Continuity & Isolation Testing: All conductors are tested for continuity. Insulation resistance is verified to confirm no cross-talk or breakdown between signal and power lines.
  • Firmware & Embedded Component Check (where applicable): For harness assemblies incorporating embedded identification or communication components, firmware version compatibility with IRB14000 controller versions is verified.
  • Packaging for Long-Term Storage: Units intended for spare inventory are packaged in anti-static, moisture-barrier materials with desiccant. Storage life under these conditions exceeds 5 years without degradation.

Key Features for System Maintenance

Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.

Can you source other IRB14000 spare parts?
Yes. DriveKNMS specializes in hard-to-find and limited-availability spare parts for industrial robot platforms. Contact us with your full parts list for availability assessment.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top