Allen-Bradley MOX720-P4668E 80026-518-01 DC Power Supply – Obsolete 1771 Series Spare Part

Technical Dossier

Product Details And Specifications

Allen-Bradley MOX720-P4668E 80026-518-01 DC Power Supply – Obsolete 1771 Series Spare Part

When a DC power supply module fails inside a legacy Allen-Bradley 1771-series PLC rack, the consequences extend far beyond a single component. The 1771 platform—widely deployed across discrete manufacturing, automotive assembly, and process control facilities throughout the 1980s and 1990s—was built around a tightly integrated backplane architecture. A failed power supply does not merely interrupt one function; it takes down the entire I/O chassis. For facilities that have not yet migrated to ControlLogix or CompactLogix, the cost of an unplanned line stoppage can reach tens of thousands of dollars per hour. A full system retrofit, including engineering, rewiring, PLC reprogramming, and operator retraining, routinely runs into the hundreds of thousands—sometimes exceeding seven figures for large multi-rack installations.

The Allen-Bradley MOX720-P4668E (Rockwell part reference 80026-518-01) is a DC power supply package designed for use within legacy 1771-series I/O chassis configurations. DriveKNMS maintains RFQ-reviewed sourcing status of this discontinued component, sourced through controlled industrial channels, for facilities that require a direct hardware replacement without system redesign.

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Note: Specific electrical parameters (voltage output, current rating, wattage) for this assembly are not published in this listing to prevent misapplication. Please contact our technical team with your chassis model and slot configuration for verified compatibility confirmation before ordering.

Solving the Discontinued Hardware Crisis

The Allen-Bradley 1771 I/O platform represents one of the most widely installed legacy PLC architectures in industrial history. Facilities running TDC-era control systems—often alongside Honeywell TDC 3000 distributed control systems or early SCADA infrastructure—built their production logic around 1771 hardware over decades. The backplane, the I/O modules, and the power supply are interdependent. Replacing one element without the others is frequently not an option.

A verified replacement power supply module, by contrast, restores system operation without touching the control architecture. For facilities with a defined migration timeline of 3–7 years, maintaining a small inventory of critical spare parts is the lowest-cost strategy available. The MOX720-P4668E is one of those critical components.

Extending Automation Asset Life by 5–10 Years: A Maintenance Strategy for Plant Management

For plant managers and maintenance engineers operating legacy PLC infrastructure under budget constraints, the following framework has been applied successfully across multiple facilities to defer capital expenditure while maintaining production reliability:

2. Establish a minimum spare parts inventory. For a 1771-based system, a minimum viable spare kit typically includes: one power supply per chassis type in use, one processor module, and one of each high-density I/O module type. This inventory, stored under controlled conditions, can sustain operations through multiple failure events without triggering an emergency procurement cycle.

3. Source from verified industrial surplus channels. Not all surplus inventory is equal. Components that have been stored improperly—exposed to humidity, temperature cycling, or electrostatic discharge—may fail prematurely or intermittently. Procurement should be limited to suppliers who can document storage conditions and provide functional test results.

4. Implement a scheduled inspection protocol. Legacy power supplies are susceptible to electrolytic capacitor degradation over time, even without active use. A biannual inspection of installed units—checking for capacitor bulging, terminal corrosion, and output voltage stability under load—can identify components approaching end-of-life before they cause an unplanned outage.

5. Document firmware and hardware revision levels. In 1771-series systems, hardware revision mismatches between power supplies and chassis backplanes can cause compatibility issues. Maintaining a revision log for all installed components reduces diagnostic time during fault events.

Applied consistently, this approach has allowed facilities to extend the operational life of legacy automation assets by 5 to 10 years beyond the point at which spare parts became commercially unavailable—at a fraction of the cost of a full system migration.

Condition & Reliability Assurance

All obsolete and legacy components supplied by DriveKNMS pass through a structured 5-step quality assurance process before dispatch:

Step 1 – Visual and Physical Inspection: Each unit is examined for physical damage, housing cracks, terminal corrosion, and label integrity. Units with evidence of field damage or improper storage are rejected at this stage.

Step 2 – Electrolytic Capacitor Assessment: Power supply modules are specifically evaluated for capacitor aging—one of the primary failure modes in components that have been in storage or light service for extended periods. Capacitors showing signs of bulging, leakage, or elevated ESR are flagged for replacement or unit rejection.

Step 3 – Firmware and Hardware Revision Verification: Where applicable, firmware version and hardware revision markings are documented and cross-referenced against known compatibility data for the target platform.

Step 4 – Pin and Connector Integrity Check: All connector pins and backplane interface contacts are inspected for corrosion, deformation, and contamination. Contacts are cleaned and treated where necessary.

Step 5 – Functional Power-On Test: Units are powered and tested under controlled conditions to verify basic operational status prior to packaging and shipment.

Key Features for System Maintenance

The MOX720-P4668E is a direct hardware replacement for the original Allen-Bradley 1771 chassis power supply position. Key operational characteristics relevant to maintenance planning:

Q: Can you source other 1771-series components?
A: Yes. DriveKNMS specializes in obsolete and hard-to-find industrial automation components across multiple legacy platforms. Contact us with your full parts list for availability assessment.