ABB 3HNA023200-001/00 LCD Screen – Obsolete TPPB-02 Spare Part for IRB 6660 Robot

Technical Dossier

Product Details And Specifications

ABB 3HNA023200-001/00 LCD Screen – Obsolete TPPB-02 Spare Part for IRB 6660 Robot

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Solving the Discontinued Hardware Crisis

The ABB IRB 6660 is a heavy-duty industrial robot deployed extensively in press tending, machine tending, and foundry applications. Many of these installations date back to the mid-2000s and early 2010s. The TPPB-02 teach pendant is the primary human-machine interface for this platform — used for jogging, programming, and fault diagnosis. Without a functional display, the pendant is inoperable.

ABB IRC5 controller ecosystem replacement parts for the TPPB-02 pendant — particularly display assemblies — have exited the standard distribution network. Facilities that have not pre-positioned spare displays face a critical gap: the robot is mechanically sound, the controller is functional, but a single display component renders the entire cell non-productive.

Factory managers operating IRB 6660 lines face a specific pressure: automotive and heavy manufacturing customers do not accept end-of-life hardware as a justification for missed delivery. The robot must run. The teach pendant must work. Sourcing the 3HNA023200-001/00 from a specialist distributor like DriveKNMS is the only path that avoids both production loss and premature capital replacement.

How to extend your IRB 6660 asset life by 5–10 years at low cost:

Condition & Reliability Assurance

Discontinued components sourced outside the OEM channel require a higher standard of incoming inspection. DriveKNMS applies a 5-step QA process to every TPPB-02 display assembly before it leaves our facility:

1. Visual and mechanical inspection. Housing integrity, connector condition, and screen surface are examined for cracks, delamination, and physical damage.
2. Electrolytic capacitor assessment. Aging capacitors are the primary failure mode in display driver boards from this era. Each unit is inspected for capacitor bulging, leakage, and ESR deviation.
3. Firmware and revision verification. The hardware revision marking (/00) is confirmed against the unit physical labeling and internal markings to ensure version consistency.
4. Pin and connector corrosion check. All interface connectors are inspected under magnification for oxidation, bent pins, and contamination. Affected contacts are cleaned to IPC-A-610 standards where applicable.
5. Functional power-on test (where test fixture is available). Units are powered through a compatible test harness to verify display initialization and backlight operation prior to shipment.

Key Features for System Maintenance

• Drop-in replacement. The 3HNA023200-001/00 is a direct mechanical and electrical replacement for the original TPPB-02 display. No bracket modification, no wiring adaptation.
• No reprogramming required. The IRC5 controller does not require re-parameterization following a display swap. Robot programs, tool data, and safety configurations remain intact.
• RFQ terms review: Commercial terms are confirmed during RFQ review based on model, condition, documentation, quantity and destination.
• Preserves existing operator training investment. Your team knows the TPPB-02 interface. Keeping the original pendant hardware operational means zero retraining cost.

Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.