ABB SNAT Series Drive Boards: SNAT 7261 QCP

Name: ABB SNAT Series Drive Boards: SNAT 7261 QCP
Brand: ABB

Model: SNAT 7261 QCP

Brand ABB

Series SNAT Series

Model SNAT 7261 QCP

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

ABB SNAT Series Technical Notes

The Evolution of SNAT Architecture

The SNAT board family was introduced as part of ABB's modular drive control philosophy in the late 1980s and early 1990s, initially supporting the ACS 600 and DCS 600 drive platforms. Early SNAT boards used parallel backplane communication with proprietary ABB DDCS (Distributed Drive Control System) fiber-optic links for inter-board signaling. As drive platforms evolved through the ACS 800 and ACS 880 generations, the SNAT architecture was progressively refined to support higher switching frequencies, improved EMC compliance, and expanded fieldbus compatibility (PROFIBUS, Modbus RTU, DeviceNet).

Compatibility constraints are a critical operational consideration: SNAT boards are not universally interchangeable across drive generations. A board designed for an ACS 600 chassis will not directly substitute into an ACS 800 rack without firmware and hardware validation. Backplane connector pinouts, DDCS channel assignments, and power rail voltages differ between generations. End-users maintaining legacy ACS 600 or DCS 600 installations must source generation-matched SNAT boards to avoid drive faults or control instability. As of 2026, the majority of SNAT variants are classified by ABB as End-of-Life (EOL) or RFQ availability review, placing lifecycle extension sourcing at the center of maintenance strategy for facilities operating this equipment.

SNAT Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly sourced SNAT series boards. Each entry reflects the board's primary functional role within the drive control architecture.

SNAT 7261 QCP: Quantum Control Panel interface board for ACS/DCS 600 series drives; manages operator panel communication and parameter display bus.
SNAT 601 CNT: Pulse encoder counter board; processes incremental encoder feedback for closed-loop speed control in ACS 600 drives.
SNAT 602 CNT: Dual-channel encoder interface; supports two independent encoder inputs for multi-motor or master-follower configurations.
SNAT 603 MUL: Multiplexer board; expands analog I/O channel capacity within the ACS 600 control section.
SNAT 604 MUL: Extended multiplexer variant; provides additional analog input channels for process variable monitoring.
SNAT 605 CNT: High-resolution counter board; used in precision positioning applications requiring fine encoder resolution.
SNAT 606 CNT: Counter board with extended input voltage range; suited for industrial encoder types with non-standard supply voltages.
SNAT 607 MUL: Analog output multiplexer; routes multiple analog output signals to external process controllers or recorders.
SNAT 608 MUL: Digital I/O expansion board; adds discrete input/output capacity to the ACS 600 control module rack.
SNAT 609 CNT: Resolver interface board; converts resolver feedback signals to digital speed/position data for the drive CPU.
SNAT 610 CNT: Absolute encoder interface; supports SSI and EnDat protocol absolute encoders for zero-reference positioning.
SNAT 611 MUL: Communication multiplexer; manages DDCS fiber-optic channel routing between drive control boards.
SNAT 612 MUL: Extended DDCS multiplexer; supports larger node counts in multi-drive DDCS ring topologies.
SNAT 613 CNT: Tachometer input board; processes analog DC tachometer signals for legacy closed-loop speed regulation.
SNAT 614 CNT: Frequency-to-analog converter board; translates pulse train speed references to analog voltage/current signals.
SNAT 615 MUL: I/O extension module; provides supplementary digital and analog I/O for complex process automation integration.
SNAT 616 CNT: Synchronization board; coordinates phase-locked operation between multiple ACS 600 drives in tandem configurations.
SNAT 617 MUL: Fieldbus adapter interface board; bridges DDCS internal communication to external PROFIBUS DP or Modbus networks.
SNAT 618 CNT: Safety relay interface board; integrates Safe Torque Off (STO) and emergency stop relay logic into the drive control chain.
SNAT 7260 QCP: Predecessor QCP panel board to the 7261; functionally equivalent with earlier firmware revision compatibility.

Quality Control for the SNAT Range

SNAT series boards present specific test challenges due to their reliance on DDCS fiber-optic backplane communication and proprietary ABB control bus protocols. DriveKNMS employs a structured test protocol for all SNAT boards:

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.