Model: 22810-00-06-10-02
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The Bently Nevada 22810 Series represents one of the most widely deployed 8mm eddy-current proximity probe families in global heavy industry. Installed across petrochemical refineries, nuclear power stations, LNG terminals, steel mills, and rotating machinery monitoring systems, the 22810 Series operates as the sensing front-end of Bently Nevada's 3300 and 7200 Series monitoring platforms. Its non-contact measurement principle — detecting shaft displacement, vibration, and eccentricity without physical contact — makes it the standard of record for API 670-compliant machinery protection systems worldwide.
The series is engineered for continuous operation in harsh environments: high ambient temperature, chemical exposure, and high-vibration mechanical enclosures. Its 8mm tip diameter provides a balance between sensitivity and installation flexibility, making it suitable for both new-build turbomachinery and retrofit monitoring upgrades on legacy assets.
The 22810 Series was introduced as part of Bently Nevada's second-generation eddy-current probe portfolio, designed to interface directly with the 3300 XL 8mm Proximity Transducer System. Early variants used a fixed-length armored cable with a standardized TNC connector, targeting turbine OEM integration. Over successive revisions, Bently Nevada introduced extended temperature ratings, improved EMI shielding, and tighter dimensional tolerances to meet IEC 60068 environmental standards.
The series is mechanically compatible with the 3300 Series extension cables (e.g., 330130) and drivers/oscillators (e.g., 3300 XL 8mm driver), forming a complete transducer chain. As the 3300 XL platform matured, the 22810 probe variants were validated against the 3500 Series rack-based monitoring system, extending their operational lifecycle well into the 2020s. For facilities running legacy 7200 Series monitors, the 22810 probes remain the approved sensing element, though system integrators must verify driver compatibility on a case-by-case basis.
Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.
The following SKUs represent the core configurations within the Bently Nevada 22810 8mm Proximity Probe Series, classified by cable length, temperature rating, and connector specification:
22810-00-06-10-02: 8mm probe, 0.5m armored cable, standard temp, TNC connector, radial/axial use
22810-00-06-10-05: 8mm probe, 0.5m cable, extended temp rating, TNC, high-vibration environments
22810-00-06-10-08: 8mm probe, 0.5m cable, ATEX-rated, intrinsically safe, Zone 1 hazardous areas
22810-00-10-10-02: 8mm probe, 1.0m armored cable, standard temp, TNC, general turbomachinery
22810-00-10-10-05: 8mm probe, 1.0m cable, extended temp, TNC, compressor train monitoring
22810-00-10-10-08: 8mm probe, 1.0m cable, ATEX Zone 1, intrinsically safe configuration
22810-00-20-10-02: 8mm probe, 2.0m armored cable, standard temp, TNC, extended reach installations
22810-00-20-10-05: 8mm probe, 2.0m cable, high-temp rated, TNC, steam turbine bearing housings
22810-00-20-10-08: 8mm probe, 2.0m cable, ATEX, intrinsically safe, offshore platform use
22810-00-30-10-02: 8mm probe, 3.0m armored cable, standard temp, TNC, large frame gas turbines
22810-00-30-10-05: 8mm probe, 3.0m cable, extended temp, TNC, hot section proximity monitoring
22810-00-40-10-02: 8mm probe, 4.0m armored cable, standard temp, TNC, remote sensor installations
22810-00-40-10-05: 8mm probe, 4.0m cable, high-temp, TNC, boiler feed pump monitoring
22810-00-50-10-02: 8mm probe, 5.0m armored cable, standard temp, TNC, long-run cable routing
22810-00-50-10-05: 8mm probe, 5.0m cable, extended temp, TNC, nuclear-grade proximity sensing
22810-00-06-10-02-CN: China-market variant, 0.5m cable, GB/T compliance, domestic certification
Physical Inspection: Probe tip examined under magnification for mechanical damage, corrosion, or dimensional deviation. Cable armor inspected for kinking, crushing, or jacket breach. TNC connector inspected for pin integrity and thread condition.
Electrical Verification: Coil resistance measured and compared against OEM specification. Insulation resistance tested at 500VDC between conductor and shield. Cable continuity verified end-to-end.
Functional Calibration Check: Where test equipment permits, probe output voltage is verified against a calibrated target at the standard gap range (0.25mm–2.54mm linear range for 8mm probes). Gap voltage curve compared against Bently Nevada published calibration data.
Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.
Related Paths
Bently Nevada RS901104-03-050-10-01 R200602-400808 is listed for 3300 Series RFQ review. Confirm quantity, condition and destination before quotation.
Bently Nevada TM0180-A08-B00-C02-D10 is listed for Monitoring Systems RFQ review. Confirm quantity, condition and destination before quotation.
Bently Nevada TACH100-01 174652-01 is listed for Monitoring Systems RFQ review. Confirm quantity, condition and destination before quotation.
