Bently Nevada 3300 XL Modules – 330101-00-40-10-02-05

Name: Bently Nevada 3300 XL Modules – 330101-00-40-10-02-05
Brand: Bently Nevada

Model: 330101-00-40-10-02-05

Brand Bently Nevada

Series 3300 XL

Model 330101-00-40-10-02-05

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Bently Nevada 3300 XL Series Technical Notes

3300 XL Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly sourced components within the Bently Nevada 3300 XL ecosystem. Each entry reflects a distinct functional role within the machinery protection architecture.

Proximity Sensors & Transducers

330101-00-40-10-02-05: 3300 XL 8mm proximity sensor, 40 mil range, 5m cable, standard tip, radial/axial vibration measurement.
330101-00-40-10-02-CN: 3300 XL 8mm proximity sensor, 40 mil range, 5m cable, Chinese connector variant for localized installations.
330101-00-40-10-01-05: 3300 XL 8mm proximity sensor, 40 mil range, 1m cable, short-reach configuration for compact bearing housings.
330104-00-40-10-02-05: 3300 XL 11mm proximity sensor, 80 mil range, 5m cable, for large-shaft diameter applications exceeding 100mm.
330180-91-00: 3300 XL proximity sensor, reverse-mount configuration, stainless steel housing, high-temperature rated to 177°C.

Extension Cables

330130-045-00-00: 3300 XL 5m armored extension cable, standard coaxial, compatible with all 8mm and 11mm probe series.
330130-080-00-00: 3300 XL 8m armored extension cable, used in conjunction with 330101-00-40-10-02-05 and similar long-reach configurations.
330130-090-00-00: 3300 XL 9m extension cable, for installations requiring maximum probe-to-driver separation.

Oscillator-Demodulators (Drivers)

330180-X1-05: 3300 XL oscillator-demodulator, standard output, -24 VDC supply, compatible with 5m and 8m cable assemblies.
330180-X1-CN: 3300 XL oscillator-demodulator, Chinese market variant, modified connector pinout.

Monitor Modules

3300/16-13-01-01-00-00-00: 3300 XL 16-channel vibration monitor, dual-voting logic, relay output, rack-mount.
3300/20-13-01-00-00: 3300 XL radial vibration monitor, single-channel, 4–20 mA output, API 670 compliant.
3300/25-13-01-00-00: 3300 XL axial position monitor, single-channel, thrust measurement, ±1.0 mm range.
3300/46-13-01-00-00: 3300 XL Keyphasor module, single-channel, TTL output, phase reference for rotor speed and timing.
3300/50-13-01-00-00: 3300 XL power supply module, 24 VDC regulated, redundant input capable, rack-mount form factor.
3300/55-13-01-00-00: 3300 XL I/O terminal block module, field-wiring interface, screw-terminal, DIN rail compatible.
3300/95-13-01-00-00: 3300 XL communication gateway module, RS-232/RS-485 output, System 1 software interface.

Quality Control for the 3300 XL Range

The 3300 XL proximity sensor system — comprising probe, extension cable, and oscillator-demodulator as a matched assembly — requires end-to-end electrical validation before installation. DriveKNMS applies a structured test protocol to all 3300 XL components: (1) DC bias voltage verification at the driver output (nominal -10.0 VDC at mid-gap for standard 8mm probes); (2) sensitivity calibration check against the standard 200 mV/mil (7.87 V/mm) output curve; (3) cable continuity and insulation resistance test at 500 VDC to detect micro-fractures in armored extension cables; (4) frequency response sweep from 0 to 10 kHz to confirm signal bandwidth integrity; (5) connector inspection and re-torque to manufacturer specification. Monitor modules undergo relay output verification, analog output accuracy check (±0.1 mA across 4–20 mA range), and communication port handshake testing with System 1 software. All test results are logged against the unit serial number and retained for customer documentation requests.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.