Bently Nevada 3300 XL Proximity Probe Modules – 330101-00-15-05-01-00

Model: 330101-00-15-05-01-00

Series 3300 XL
Model 330101-00-15-05-01-00
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Bently Nevada 3300 XL Series Technical Notes

The Evolution of 3300 XL Architecture

The 3300 XL series succeeded the earlier Bently Nevada 3300 standard proximity system, introducing extended temperature range operation, improved EMI shielding, and tighter linearity tolerances across the full measurement gap range. The XL designation denotes the extended performance specification: operating temperature from -35°C to +121°C at the probe tip, with driver/extension cable assemblies rated for continuous immersion in process fluids in many configurations.

Early 3300 series probes (pre-XL) used a 5 mm sensing diameter and were limited to shorter cable runs before signal conditioning degradation became significant. The 3300 XL platform standardized on 8 mm and 11 mm probe diameters, with the 8 mm variant (as in SKU 330101-00-15-05-01-00) becoming the dominant choice for turbine shaft monitoring due to its balance between sensitivity and physical footprint. The system architecture separates the probe, extension cable, and Proximitor sensor into discrete, field-replaceable components — a design decision that has proven critical for lifecycle management in facilities where probe replacement must occur without rack shutdown.

Compatibility across the 3300 XL family is governed by matched system sets: probe, extension cable, and Proximitor must share the same diameter designation and gap voltage calibration range. Mixing 8 mm and 11 mm components within a single channel is not supported and will produce non-linear output. Modern replacements for end-of-life 3300 XL channels are available via the Bently Nevada 3500/42M and 3500/45 monitor cards, which accept 3300 XL transducer inputs with appropriate configuration.

3300 XL Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly stocked components within the Bently Nevada 3300 XL proximity transducer system. Classifications follow functional role within the measurement chain.

Proximity Probes — 8 mm Diameter

330101-00-15-05-01-00: 8 mm probe, 15 cm armored cable, standard temperature, reverse mount
330101-00-30-05-01-00: 8 mm probe, 30 cm armored cable, standard temperature, reverse mount
330101-00-60-05-01-00: 8 mm probe, 60 cm armored cable, standard temperature, reverse mount
330101-00-90-05-01-00: 8 mm probe, 90 cm armored cable, standard temperature, reverse mount
330104-00-15-05-01-00: 8 mm probe, 15 cm cable, high-temperature rating, reverse mount
330104-00-30-05-01-00: 8 mm probe, 30 cm cable, high-temperature rating, reverse mount

Proximity Probes — 11 mm Diameter

330105-02-12-10-02-00: 11 mm probe, 12 cm cable, standard temperature, forward mount
330105-02-30-10-02-00: 11 mm probe, 30 cm cable, standard temperature, forward mount
330105-02-60-10-02-00: 11 mm probe, 60 cm cable, standard temperature, forward mount

Extension Cables

330130-045-00-00: 3300 XL extension cable, 4.5 m, 8 mm system compatible
330130-090-00-00: 3300 XL extension cable, 9.0 m, 8 mm system compatible
330130-180-00-00: 3300 XL extension cable, 18.0 m, 8 mm system compatible
330180-X0-05: 3300 XL extension cable, 11 mm system, various lengths

Proximitor Sensors (Signal Conditioners)

330180-91-00: 3300 XL Proximitor sensor, 8 mm, -18.5 Vdc nominal, DIN rail mount
330180-51-05: 3300 XL Proximitor sensor, 11 mm, field mount enclosure, ATEX rated
330180-X0-CN: 3300 XL Proximitor, conformal coated PCB variant for high-humidity environments

Mounting Hardware & Accessories

21747-01: Proximity probe mounting bracket, standard 3300 XL, stainless steel
02619610: Proximitor junction box, stainless, IP66, field installation

Sourcing Hard-to-Find & Obsolete 3300 XL Parts

Bently Nevada has transitioned active development to the 3500 series platform, placing the 3300 XL in a sustained support lifecycle. New manufacture of certain probe configurations and Proximitor variants has been discontinued, making secondary market sourcing the primary procurement channel for facilities maintaining legacy installations.

Common sourcing scenarios handled by DriveKNMS include: emergency replacement of failed Proximitor sensors during planned outage windows, bulk procurement of matched probe-cable-Proximitor sets for turbine overhaul projects, and long-term spares agreements for facilities with 10+ year maintenance horizons on existing 3300 XL installations.

Quality Control for the 3300 XL Range

The 3300 XL measurement chain requires end-to-end electrical verification, not component-level testing in isolation. DriveKNMS applies the following test protocol to all 3300 XL inventory:

Gap voltage linearity sweep: Each probe-Proximitor pair is tested across the full gap range (0–2.5 mm for 8 mm probes) using a calibrated target disc of the specified material (AISI 4140 steel). Output voltage linearity must fall within ±0.5% of the published scale factor (200 mV/mil or 7.87 V/mm nominal).

Scale factor verification: Confirmed against Bently Nevada factory calibration data where available. Deviations exceeding 1% are flagged and disclosed.

Extension cable continuity and insulation resistance: All cable assemblies tested at 500 Vdc insulation resistance. Minimum acceptable IR: 100 MΩ.

Proximitor power supply rejection: Supply voltage varied ±10% from nominal -24 Vdc. Output variation must remain within specification.

High-temperature probe inspection: Armored cable jacket and probe tip inspected for thermal degradation, cracking, or contamination that would affect dielectric properties.

Units that do not pass all stages are quarantined and not listed for sale.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top