Bently Nevada TACH100-01 / 174652-01 Digital Tachometer – Obsolete Proximitor Series Spare Part
Bently Nevada TACH100-01 174652-01 is listed for Monitoring Systems RFQ review. Confirm quantity, condition and destination before quotation.
Model: 330101-15-40-10-02-00
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The 330101 series descends from Bently Nevada's original 7200 and 3300 eddy-current probe families introduced in the 1970s and 1980s. The transition to the 3300 XL platform in the 1990s standardized the 8mm probe tip diameter and introduced a unified -24 VDC bias voltage output, enabling direct compatibility with the 3500 Series Machinery Protection System rack. Key architectural milestones include the shift from integral cable designs to field-separable probe-and-cable assemblies, the introduction of ATEX/IECEx-certified variants for Zone 1 hazardous areas, and the adoption of armored stainless-steel jacketing for high-temperature and high-vibration environments. The 330101 series uses a passive LC oscillator circuit within the proximitor; the probe itself contains no active electronics, making it inherently robust against temperature extremes from -35°C to +177°C (probe tip). Compatibility with legacy 3300 and 7200 proximitors requires verification of gap voltage range and scale factor (200 mV/mil or 7.87 V/mm). Modern replacement pathways include the 330900 Series (reverse-mount) and the 3300 XL 11mm system for applications requiring greater sensing range.
The following SKUs represent the primary configurations within the 330101 proximity probe series, organized by cable length and connector/termination type. All units are 8mm tip diameter, eddy-current type, with a nominal sensitivity of 200 mV/mil (7.87 V/mm) and a linear range of 0.25–2.25 mm (10–90 mil).
330101-00-06-10-02-00: 6-inch (152 mm) armored probe, standard 3-pin connector, general-purpose radial vibration measurement.
330101-00-08-10-02-00: 8-inch (203 mm) armored probe, standard connector, short-reach radial or axial position sensing.
330101-00-10-10-02-00: 10-inch (254 mm) armored probe, standard connector, mid-length radial vibration on compact turbines.
330101-00-12-10-02-00: 12-inch (305 mm) armored probe, standard connector, axial thrust position on steam turbines.
330101-00-16-10-02-00: 16-inch (406 mm) armored probe, standard connector, extended-reach installations in large compressor casings.
330101-00-20-10-02-00: 20-inch (508 mm) armored probe, standard connector, long-reach radial vibration on large frame gas turbines.
330101-00-30-10-02-00: 30-inch (762 mm) armored probe, standard connector, deep-bore installations in reactor coolant pumps.
330101-15-40-10-02-00: 15-inch (381 mm) armored probe, 40-inch (1016 mm) integral armor, standard connector — the specific SKU on this listing, suited for radial vibration measurement where moderate cable routing clearance is required.
330101-00-06-10-02-05: 6-inch probe, ATEX/IECEx Zone 1 certified variant, intrinsically safe barrier compatible.
330101-00-12-10-02-05: 12-inch probe, ATEX/IECEx Zone 1 certified, for hazardous-area axial position measurement.
330101-00-20-10-02-05: 20-inch probe, ATEX/IECEx Zone 1 certified, long-reach hazardous-area radial vibration.
330101-00-06-10-01-00: 6-inch probe, alternate connector type (pigtail termination), for legacy junction box wiring.
330101-00-12-10-01-00: 12-inch probe, pigtail termination, axial position on legacy 3300 system installations.
330101-00-20-10-01-00: 20-inch probe, pigtail termination, radial vibration on older 3300 rack configurations.
330101-00-30-10-01-00: 30-inch probe, pigtail termination, deep-bore legacy installations requiring field-terminated cable ends.
330101-00-06-10-02-CN: 6-inch probe, China-market variant with localized certification markings, functionally identical to standard -02-00 suffix.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.