Emerson DeltaV KJ3242X1-FA1 12P2575X032 H1 Terminal Block

Name: Emerson DeltaV KJ3242X1-FA1 12P2575X032 H1 Terminal Block
Brand: Emerson

Model: KJ3242X1-FA1 12P2575X032

Brand Emerson

Series DeltaV

Model KJ3242X1-FA1 12P2575X032

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Emerson DeltaV Series Technical Notes

The Emerson DeltaV distributed control system (DCS) is deployed across the global process industries — including petrochemical refineries, nuclear power generation facilities, LNG terminals, pharmaceutical batch plants, and offshore oil & gas platforms. Since its commercial introduction in the mid-1990s, DeltaV has accumulated an installed base measured in tens of thousands of nodes worldwide. The KJ3242X1-FA1 12P2575X032 H1 Terminal Block is a field interface component within the DeltaV I/O subsystem, providing the physical wiring termination point for FOUNDATION Fieldbus H1 segment connections. Its role is critical in any DeltaV node that interfaces with FF-H1 field devices such as transmitters, valve positioners, and flow meters operating on the 31.25 kbit/s H1 bus.

The Evolution of DeltaV Architecture

DeltaV was architected from the outset around an open, scalable node-based topology. Generation 1 (1996–2002) introduced the MD Controller with Series 2 I/O cards using the KJ prefix designation. Generation 2 (2002–2010) expanded the I/O catalog with HART-enabled analog cards, redundant power supplies, and the introduction of FOUNDATION Fieldbus H1 interface cards — the KJ3242 family belongs to this era. Generation 3 (2010–2018) brought the Electronic Marshalling concept via CHARM (Characterization Module) technology, reducing panel wiring density. Generation 4 (2018–present) introduced the DeltaV Compact Controller S-series and virtualized DeltaV Live HMI.

The KJ3242X1-FA1 terminal block is associated with the KJ3242 FF-H1 Interface Card. While the KJ3242 card itself has transitioned to end-of-active-production status, it remains in service at thousands of sites running DeltaV v11 through v14 systems. Replacement migration paths include the CHARM FF-H1 CIOC, but direct hardware substitution is not possible without engineering rework, making original spare parts essential for brownfield maintenance.

DeltaV Full Catalog & Functionalities (SKU List)

FOUNDATION Fieldbus H1 Interface & Terminal Blocks

KJ3242X1-FA1 12P2575X032: H1 Terminal Block for KJ3242 FF-H1 Interface Card, 12-port wiring termination assembly.
KJ3242X1-BA1: FF-H1 Interface Card, single-channel FOUNDATION Fieldbus H1 segment controller.
KJ3242X1-BC1: FF-H1 Interface Card with redundant H1 segment support for high-availability loops.

Analog Input / Output Modules

KJ3221X1-BA1: 8-channel 4–20 mA HART Analog Input card, Series 2 I/O.
KJ3222X1-BA1: 8-channel 4–20 mA HART Analog Output card, Series 2 I/O.
KJ3221X1-BC1: 8-channel AI card with redundant backplane bus support.
KJ3222X1-BC1: 8-channel AO card with redundant backplane bus support.

Digital Input / Output Modules

KJ3211X1-BA1: 8-channel 24 VDC Discrete Input card, Series 2 I/O.
KJ3212X1-BA1: 8-channel 24 VDC Discrete Output card, Series 2 I/O.
KJ3211X1-BC1: 8-channel DI card, redundant bus configuration.
KJ3212X1-BC1: 8-channel DO card, redundant bus configuration.

Controllers

KJ2003X1-BA1: DeltaV MD Controller, primary node processor for Series 2 I/O subsystems.
KJ2003X1-BC1: DeltaV MD Controller with redundancy module support.
KJ2005X1-BA1: DeltaV MD Plus Controller, extended memory and processing capacity.

Power Supplies & Carriers

KJ1501X1-BA1: DeltaV 8-slot I/O Carrier, horizontal mounting, Series 2.
KJ1501X1-BC1: DeltaV 8-slot I/O Carrier with redundant power bus rail.
KJ0371X1-BA1: DeltaV Power Supply, 24 VDC, 10 A output for I/O subsystem rails.

Communications & Network Adapters

KJ4001X1-BA1: DeltaV PROFIBUS DP Interface Card, master class 1 operation.
KJ4002X1-BA1: DeltaV DeviceNet Interface Card, scanner mode.

Quality Control for the DeltaV Range

DeltaV Series 2 I/O cards and terminal blocks involve multi-layer PCB assemblies with proprietary backplane bus connectors and EEPROM-based characterization data. DriveKNMS applies the following test protocol to all KJ-series components prior to dispatch:

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.