Siemens 6ES7972-0BB12-0XA0 PROFIBUS DP Connector – Critical Spare for S7-300 / S7-400 Legacy Systems
Siemens SIEMENS 6ES7972-0BB12-0XA0 Profibus Connector is listed for S7-300 RFQ review. Confirm quantity, condition and destination before quotation.
Model: 6ES7323-1BL00-0AA0
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The Siemens SIMATIC S7-300 SM 323 series represents a class of digital combination I/O signal modules engineered for integration within the S7-300 modular PLC platform. Deployed across heavy industrial sectors including petrochemical refineries, nuclear power auxiliary systems, offshore platforms, and continuous-process chemical plants, the SM 323 range provides deterministic digital signal handling on the S7-300 backplane bus. Its 24 V DC input/output architecture and DIN rail form factor have made it a standard bill-of-materials component in distributed control system (DCS) cabinets and machine safety panels globally. The series operates within the broader SIMATIC S7-300 ecosystem alongside CPU 31x controllers, SM 321 input modules, SM 322 output modules, and CP communication processors, forming a complete I/O subsystem that has accumulated decades of installed base in facilities requiring long-term spare parts continuity.
The SM 323 module family was introduced as part of the original SIMATIC S7-300 platform launch in the early 1990s, designed to consolidate digital input and output channels onto a single slot to reduce rack space in space-constrained control cabinets. Early variants such as the 6ES7323-1BH00-0AA0 (8 DI / 8 DO) established the foundational electrical specification: 24 V DC sourcing inputs with 7 mA nominal current and transistor-based 0.5 A outputs with short-circuit protection.
Subsequent hardware revisions introduced higher channel densities. The 6ES7323-1BL00-0AA0 expanded the channel count to 16 DI / 16 DO, doubling cabinet I/O density without consuming additional rack slots. Electrically, the module retained backward-compatible 40-pin front connector wiring, allowing panel rewiring to be avoided during module replacement — a critical factor in brownfield plant upgrades.
With the introduction of the S7-300 F (Fail-Safe) variants and the eventual migration path toward the SIMATIC S7-1500 platform, the SM 323 series entered a mature/end-of-life phase. Siemens formally transitioned new project engineering toward the ET 200SP and S7-1500 I/O architecture. However, the installed base of SM 323 modules in operational plants remains substantial, and the modules continue to be supported under Siemens' Industry Online Support spare parts program. For facilities unable to undertake full platform migration, third-party lifecycle extension sourcing is the primary continuity strategy.
The following SKUs represent verified, commonly deployed members of the Siemens S7-300 SM 323 digital combination I/O module family, classified by channel configuration and output type:
Digital Input / Transistor Output Modules (24 V DC):
6ES7323-1BH00-0AA0: 8 DI / 8 DO, 24 V DC, 0.5 A transistor outputs, 40-pin connector
6ES7323-1BH01-0AA0: 8 DI / 8 DO, revised hardware revision with updated MLFB diagnostics
6ES7323-1BL00-0AA0: 16 DI / 16 DO, 24 V DC, 0.5 A transistor outputs, standard workhorse module
6ES7323-1BL01-0AA0: 16 DI / 16 DO, updated firmware revision, improved short-circuit response time
Digital Input / Relay Output Modules:
6ES7323-1BH80-0AA0: 8 DI / 8 DO relay, 24 V DC inputs, 24–120 V AC/DC relay contacts, 2 A rated
6ES7323-1BH81-0AA0: 8 DI / 8 DO relay, revised relay contact rating and isolation class
6ES7323-1FL00-0AA0: 16 DI / 16 DO relay, 24 V DC inputs, relay outputs for mixed AC/DC load switching
6ES7323-1FL01-0AA0: 16 DI / 16 DO relay, updated hardware revision with enhanced EMC shielding
High-Density and Specialty Variants:
6ES7323-1BL00-0AB0: 16 DI / 16 DO, ATEX-rated variant for Zone 2 hazardous area installation
6ES7323-1BH00-0AB0: 8 DI / 8 DO, ATEX Zone 2 certified, intrinsically safe barrier compatible
6ES7323-1BL00-0AA1: 16 DI / 16 DO, successor hardware stepping with revised ASIC
6ES7323-1BH00-0AA2: 8 DI / 8 DO, latest production revision, RoHS compliant materials
Extended Temperature and Special Environment Variants:
6ES7323-1BL00-0XA0: 16 DI / 16 DO, extended temperature range (-25°C to +60°C) for outdoor cabinet use
6ES7323-1BH00-0XA0: 8 DI / 8 DO, extended temperature variant, marine and offshore certified
6ES7323-1FL00-0XA0: 16 DI / 16 DO relay, extended temperature, suitable for cold-climate process plants
SM 323 modules incorporate a dual-bus architecture: the S7-300 backplane P-bus for I/O data exchange and the K-bus for configuration and diagnostic communication with the CPU. Quality verification for used or refurbished SM 323 units requires functional validation of both bus interfaces, not solely channel-level I/O testing.
DriveKNMS applies the following test protocol to all SM 323 units processed through its facility: backplane bus continuity verification using S7-300 rack test fixture; individual channel input threshold testing at 24 V DC nominal and boundary voltages (15 V / 30 V); transistor output load testing at rated 0.5 A with short-circuit simulation; relay contact resistance measurement (relay output variants); diagnostic LED functional check for SF, DC5V, and channel-level fault indicators; and STEP 7 / TIA Portal hardware configuration recognition test confirming correct MLFB identification by the CPU. Units that fail any stage of this protocol are quarantined and not dispatched.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.