Emerson PR6423/015-040 CON021 Module – PR6423 Series

Technical Dossier

Product Details And Specifications

Emerson PR6423 Series Technical Notes

The Evolution of PR6423 Architecture

The PR6423 series originates from the Philips/Vibro-Meter lineage of eddy-current measurement technology, later consolidated under the Epro brand following Emerson's acquisition of the machinery protection portfolio. Early-generation PR6423 units were designed for DIN-rail or rack-mount installation in dedicated vibration monitoring panels, operating with fixed cable lengths matched to specific probe-extension cable combinations (PR9268 series). The architecture relies on a three-component measurement chain: proximity probe (PR6423 probe head), extension cable (PR9268), and signal converter (CON0xx series). Signal converter variants are differentiated by output type (current vs. voltage), measurement range (gap range in mm), and cable length compensation. Later revisions introduced improved EMI shielding and extended temperature ratings to accommodate harsh industrial enclosures. As the broader Epro product line has matured, the PR6423 series is now considered a legacy platform; Emerson's current equivalent architecture is the CSI 6500 and Emerson Machinery Health Manager ecosystem. However, the PR6423 remains in active service at thousands of facilities where full system replacement is not economically viable, driving sustained demand for spare converters and matched probe assemblies.

PR6423 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly sourced models within the PR6423 series. Units are classified by output type and measurement range. Each converter must be matched to the correct probe and cable combination for accurate calibration.

Current Output Converters (4–20 mA):

• PR6423/000-040 CON021: 4–20 mA output, 0–2 mm gap range, standard cable length
• PR6423/001-040 CON021: 4–20 mA output, 0–2 mm gap, extended temperature variant
• PR6423/002-040 CON021: 4–20 mA output, 0–4 mm gap range, DIN rail mount
• PR6423/003-040 CON021: 4–20 mA output, 0–4 mm gap, panel mount configuration
• PR6423/010-040 CON021: 4–20 mA output, 0–8 mm gap range, standard cable
• PR6423/011-040 CON021: 4–20 mA output, 0–8 mm gap, extended cable compensation
• PR6423/015-040 CON021: 4–20 mA output, 0–15 mm gap range, standard configuration — primary SKU for large-gap axial position monitoring
• PR6423/016-040 CON021: 4–20 mA output, 0–15 mm gap, high-temperature housing variant
• PR6423/017-040 CON021: 4–20 mA output, 0–15 mm gap, ATEX-certified for Zone 1 hazardous areas

Voltage Output Converters:

• PR6423/000-041 CON021: Voltage output (–24 V DC), 0–2 mm gap range, direct vibration monitor input
• PR6423/002-041 CON021: Voltage output, 0–4 mm gap range, rack-mount format
• PR6423/010-041 CON021: Voltage output, 0–8 mm gap, standard cable length
• PR6423/015-041 CON021: Voltage output, 0–15 mm gap range, matched to PR9268/015 extension cable

Matched Probe & Accessory References:

• PR6423/015-040 CON011: Converter with integrated barrier, 0–15 mm, intrinsically safe output
• PR6423/015-040 CON031: Converter with dual-output (current + voltage), 0–15 mm gap range
• PR9268/015-040: Extension cable, 15 mm range, matched to PR6423/015 probe head — required for accurate calibration

Quality Control for the PR6423 Range

Signal converters in the PR6423 series require functional verification beyond standard continuity checks due to their active oscillator-dependent measurement architecture. DriveKNMS applies a dedicated test protocol for this series: each converter is bench-tested using a calibrated target simulation rig that replicates the eddy-current probe load at specified gap distances. Output linearity is verified across the full gap range (0 mm to rated maximum) and compared against Emerson factory calibration curves. Current output units are verified for 4–20 mA accuracy within ±0.5% of full scale. Voltage output units are checked for DC bias stability under load. Units with CON011 (intrinsic safety barrier) suffix undergo additional isolation resistance testing per IEC 60079-11. All tested units are tagged with test date, technician ID, and measured output values prior to shipment.