GE Fanuc IC695CPE305CA CPU Module – Obsolete PACSystems RX3i Spare Part

Technical Dossier

Product Details And Specifications

GE Fanuc IC695CPE305CA CPU Module – Obsolete PACSystems RX3i Spare Part

When a PACSystems RX3i CPU fails on the production floor, the clock starts immediately. A full platform migration — new hardware, new engineering hours, new I/O wiring, new HMI integration, operator retraining — routinely runs into the hundreds of thousands of dollars, and in process-critical environments, the figure climbs further still. The IC695CPE305CA is no longer manufactured. GE Fanuc discontinued this product line, and authorized distribution channels have long since exhausted their stock. DriveKNMS maintains a limited inventory of this module sourced through verified industrial asset recovery channels. This is not a commodity item. If your facility runs a PACSystems RX3i rack and this CPU is your single point of failure, the unit on this page may be the difference between a scheduled swap and an unplanned shutdown.

Technical Specifications

Note: Electrical parameters not confirmed from official datasheet are intentionally omitted. Specifications will be verified against physical unit upon inquiry.

Solving the Discontinued Hardware Crisis

The PACSystems RX3i platform was designed as a migration bridge from GE Series 90-30 systems, and many facilities that made that transition in the 2000s and early 2010s are now facing a second discontinuation cycle. The IC695CPE305CA sits at the core of those racks. It is not a peripheral card that can be substituted with a generic alternative — it is the execution engine for the entire control program. Replacing it requires an exact hardware match or a full re-engineering of the control architecture.

For plant managers operating under capital expenditure constraints, the calculus is straightforward: a verified spare CPU module at a fraction of the cost of a platform upgrade buys 5 to 10 additional years of productive asset life. That window is sufficient to plan a proper migration on your schedule, not the schedule forced by an emergency failure. Facilities that maintain a minimum of one cold-standby CPU for each critical RX3i rack consistently avoid the category of unplanned downtime that triggers insurance claims and regulatory scrutiny. The IC695CPE305CA is the component that makes that strategy viable — provided it can still be sourced.

DriveKNMS specializes in exactly this gap: the period between a manufacturer's end-of-life announcement and a facility's readiness to migrate. We do not sell new production hardware. We source, inspect, and supply the discontinued modules that keep existing systems operational.

Condition & Reliability Assurance

Every IC695CPE305CA unit that passes through DriveKNMS undergoes a structured 5-step inspection protocol before it is offered for sale. This process is designed specifically for legacy industrial hardware, where age-related degradation follows predictable failure patterns:

• Step 1 – Electrolytic Capacitor Assessment: Capacitor aging is the primary failure mode in CPU modules of this generation. Each board is visually and electrically inspected for bulging, leakage, and capacitance drift.
• Step 2 – Firmware Version Verification: The installed firmware revision is documented and disclosed. Compatibility with your existing RX3i rack configuration is confirmed prior to shipment where possible.
• Step 3 – Pin and Connector Inspection: Backplane connector pins are examined under magnification for oxidation, corrosion, and mechanical deformation. Affected contacts are cleaned using approved non-conductive methods.
• Step 4 – Functional Power-On Test: Units are powered and brought to initialization state to confirm basic CPU operation and absence of fault codes.
• Step 5 – Cosmetic and Label Audit: Original GE Fanuc labeling, revision markings, and serial number integrity are verified and documented in the shipment record.

Units are classified as New Surplus, Tested Refurbished, or Inspected Used, and this classification is stated explicitly in the quotation. No unit is shipped without a documented condition grade.

Key Features for System Maintenance

• Drop-in replacement: The IC695CPE305CA installs directly into an existing RX3i universal backplane slot. No rack modification is required.
• No reprogramming required: The control program resides on the memory card or is downloaded from the programming terminal. CPU replacement does not require rewriting application logic.
• No engineering reconstruction: Unlike a platform migration, a CPU swap preserves all existing I/O wiring, HMI configurations, and network topology. Downtime is measured in hours, not weeks.
• Immediate operational continuity: For facilities with a documented backup of the control program, a trained technician can restore full production capability within a single maintenance window.
• Long-term sparing strategy: Procurement of two to three units for critical lines is a recognized best practice in legacy system asset management. DriveKNMS can discuss volume availability on request.

FAQ

What warranty applies to a discontinued module like the IC695CPE305CA?
DriveKNMS provides a 90-day functional warranty on all tested and refurbished units. New surplus units carry a 180-day warranty. Warranty terms are stated in the sales agreement and cover failure under normal operating conditions.

How do I confirm the unit is genuine GE Fanuc hardware and not a counterfeit?
All units are sourced from documented industrial asset recovery channels. Original manufacturer labeling, PCB markings, and revision codes are verified during inspection. We provide a condition report and, where available, original packaging documentation with each shipment.

Should I purchase more than one unit?
For any production line where the IC695CPE305CA is the sole CPU, maintaining at least one cold-standby unit is a minimum prudent practice. For facilities with multiple RX3i racks, a shared pool of two to three units is a cost-effective hedge against sourcing delays that will only increase as remaining market inventory contracts. We recommend discussing your installed base with our team so we can advise on realistic availability timelines.

Can you source other RX3i modules to complete a spare parts kit?
Yes. DriveKNMS maintains inventory across the PACSystems RX3i product family, including power supplies, communications modules, and I/O cards. Contact us with your full BOM and we will advise on availability.