GE MDO11 369B1844G5002 Digital Output Module

Technical Dossier

Product Details And Specifications

GE MDO11 Series Technical Notes

The Evolution of MDO11 Architecture

The MDO11 module family traces its lineage to GE's late-1980s effort to standardize I/O hardware across its Mark IV and Mark V turbine control platforms. Early revisions used non-isolated transistor output stages with shared common rails, limiting channel-to-channel fault isolation. By the mid-1990s, the G5001 and G5002 sub-variants introduced optocoupler-isolated output drivers per channel, a critical improvement for installations requiring SIL-2 loop integrity. The G5003 and later revisions added enhanced diagnostics via the IONET serial bus, enabling online fault reporting without rack power cycling. Compatibility across generations is constrained by backplane connector pinout revisions introduced in the Mark VI transition (circa 2001): MDO11 boards with 369B1844 base part numbers are generally interchangeable within Mark V racks but require firmware validation before installation in Mark VI I/O packs. End-of-life notices for the core MDO11 family were issued by GE between 2015 and 2019, though field populations remain active and spare part demand continues through the 2030s based on installed base projections.

MDO11 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified part numbers within the GE MDO11 and closely related digital output module family. Each entry reflects a distinct hardware revision or output configuration.

MDO11 369B1844G5002: 24 VDC isolated digital output module, 16-channel, Mark V rack compatible — the primary subject of this listing.
MDO11 369B1844G5001: 24 VDC digital output, non-isolated variant, earlier production revision.
MDO11 369B1844G5003: Enhanced diagnostic revision with IONET bus reporting, 16-channel DO.
MDO11 369B1844G5004: High-current output variant, rated to 2A per channel for direct relay drive.
MDO11 369B1844G5005: Conformal-coated version for high-humidity offshore environments.
MDO11 369B1844G5006: 48 VDC output variant for legacy field device compatibility.
MDO11 369B1844G5007: Dual-density 32-channel output board, half-slot form factor.
MDO11 369B1844G5008: SIL-2 rated revision with redundant output driver architecture.
MDO11 369B1844G5009: Low-power 12 VDC output variant for intrinsically safe barriers.
MDO11 369B1844G5010: Extended temperature range version, -40°C to +70°C operating.
MDO11 369B1844G5011: Mark VI migration-compatible revision with updated backplane connector.
MDO11 369B1844G5012: Fused output variant with per-channel electronic fuse protection.
MDO11 369B1844G5013: AC output version, 120 VAC triac-switched, 8-channel.
MDO11 369B1844G5014: Pulse output variant for stepper motor indexer applications.
MDO11 369B1844G5015: Final production revision with RoHS-compliant component substitutions.
MDO11 369B1844G5016: OEM-designated variant for GE-supplied skid packages, functionally equivalent to G5002.
MDO11 369B1844G5017: Replacement board for Mark V VCMI rack slot 14 digital output position.