Honeywell CC-PA Series Modules: CC-PAOX01 51405039-275

Model: CC-PAOX01 51405039-275

Brand Honeywell
Series CC-PA Series
Model CC-PAOX01 51405039-275
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell CC-PA Series Technical Notes

The Honeywell CC-PA Series represents the field I/O module layer of the Experion PKS (Process Knowledge System) distributed control architecture, deployed across the most demanding continuous-process industries globally — including petroleum refining, LNG terminals, nuclear power generation, chemical manufacturing, and pulp & paper. These modules interface directly with the C300 Controller via the Series C I/O Link, providing deterministic, high-integrity signal conditioning for analog and digital field devices. Installed base counts in the tens of thousands of nodes across facilities in North America, the Middle East, Europe, and Asia-Pacific, making long-term parts availability a critical operational concern for plant asset managers and procurement teams.

The Evolution of CC-PA Series Architecture

The CC-PA module family was introduced alongside the Experion PKS R100 platform in the early 2000s as Honeywell's successor to the TDC 3000 and PlantScape architectures. The design philosophy centered on a universal mounting chassis (FTA — Field Termination Assembly) that decouples the I/O electronics from field wiring, enabling hot-swap replacement without loop interruption.

Key architectural milestones:

  • R100–R200 era (2002–2007): Initial CC-PA module release. HART pass-through supported at the FTA level. Firmware updates delivered via Experion server.
  • R300–R400 era (2008–2013): Enhanced diagnostics, expanded HART command set support, improved EMC compliance to IEC 61000-4. Introduction of redundant I/O link capability.
  • R500+ era (2014–present): Universal I/O (UIO) modules introduced as the strategic successor, offering software-configurable channel types. Legacy CC-PA modules remain fully supported but are no longer the primary design-in recommendation for greenfield projects.

Compatibility note: CC-PA modules require matching FTA assemblies (e.g., CC-TAOX11 for analog output). Mixing FTA generations without firmware validation is a documented source of intermittent channel faults — a procurement risk that must be assessed at the BOM level.

CC-PA Series Full Catalog & Functionalities (SKU List)

Analog Output Modules

  • CC-PAOX01 / 51405039-275: 8-channel 4–20 mA HART Analog Output Module, the subject of this listing. Standard workhorse for control valve and positioner loops.
  • CC-PAOX11: 8-channel Analog Output, non-HART variant. Used in legacy loops where HART infrastructure is absent.
  • CC-PAOY01: Redundant Analog Output Module. Dual-channel output with bumpless switchover for SIL-rated applications.

Analog Input Modules

  • CC-PAIM01 / 51405038-175: 8-channel 4–20 mA HART Analog Input Module. Primary sensor input for transmitters (pressure, flow, temperature).
  • CC-PAIM11: 8-channel Analog Input, non-HART. Cost-optimized for non-intelligent transmitter loops.
  • CC-PAIN01: 8-channel Analog Input with NAMUR compliance. Suited for intrinsically safe zone 1 installations.
  • CC-PAIY01: Redundant Analog Input Module. Dual-redundant signal path for critical measurement loops.

Digital Input Modules

  • CC-PDIL01 / 51405040-175: 32-channel 24 VDC Digital Input Module. High-density discrete input for valve position feedback and motor status.
  • CC-PDIL11: 32-channel 120 VAC Digital Input Module. Used in legacy panel environments with AC field devices.
  • CC-PDIY01: Redundant Digital Input Module. Dual-path input for ESD and safety interlock monitoring.

Digital Output Modules

  • CC-PDOB01 / 51405041-175: 32-channel 24 VDC Digital Output Module. Standard solenoid valve and relay driver.
  • CC-PDOB11: 16-channel 120 VAC Digital Output Module. For AC-powered actuators and motor starters.
  • CC-PDOY01: Redundant Digital Output Module. Dual-coil solenoid drive for SIL 2 shutdown applications.

Pulse & Specialty Modules

  • CC-PPXX01: Pulse Input Module. Turbine meter and encoder frequency input, up to 10 kHz per channel.
  • CC-PRTX01: RTD/Thermocouple Input Module. Direct sensor connection for Pt100, Pt1000, J, K, T type inputs.
  • CC-PDOB51: High-current Digital Output Module. For direct motor contactor drive without interposing relays.

Sourcing Hard-to-Find & Obsolete CC-PA Series Parts

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.

  • Firmware version verification against the customer's Experion server revision to prevent compatibility mismatches.
  • RFQ terms review: Commercial terms are confirmed during RFQ review based on model, condition, documentation, quantity and destination.
  • Serialization and traceability documentation provided with every unit, supporting plant change management (MOC) procedures.
  • Export compliance: all shipments include commercial invoice, packing list, and certificate of origin compliant with US EAR and destination country import requirements.

For procurement teams managing multi-year maintenance contracts, DriveKNMS offers blanket order arrangements with reserved inventory allocation — reducing spot-buy risk for critical spare classifications.

Quality Control for the CC-PA Series Range

CC-PA modules use a proprietary backplane bus protocol (Series C I/O Link) that cannot be validated with generic PLC test equipment. Our QC process for this series is purpose-built:

  • Functional loop test: Each analog module is bench-tested with a calibrated 4–20 mA source/sink and HART communicator to verify all 8 channels across the full signal range (0–22 mA), including HART device descriptor read/write.
  • Digital channel verification: All DI/DO modules are tested under rated voltage with resistive load banks. Contact bounce, leakage current, and response time are measured against Honeywell factory acceptance criteria.
  • Backplane communication test: Modules are installed in a live Experion PKS test rack (R500.x) and verified for I/O Link enumeration, diagnostic status reporting, and alarm generation.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top