Honeywell CC-SCMB02 51199942-300 Modules

Model: CC-SCMB02 51199942-300

Brand Honeywell
Model CC-SCMB02 51199942-300
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell CC Series Technical Notes

The Evolution of CC Series Architecture

The CC Series was introduced alongside the Experion PKS R100 platform in the early 2000s as a replacement for the legacy TDC 3000 and PlantScape controller families. Early revisions used parallel backplane communication; subsequent hardware revisions (R200 onward) migrated to a high-speed serial backplane bus, improving noise immunity in high-EMI environments such as motor control centers and substation proximity installations. The R400 and R500 firmware generations introduced enhanced diagnostics, NAMUR NE107 status signaling, and expanded HART pass-through capability. Compatibility between hardware revisions requires attention: CC Series modules from pre-R300 firmware generations may require firmware alignment before integration into R500-era controller cabinets. End-of-primary-manufacture status has been reached for several early CC Series part numbers; however, Honeywell continues to provide extended lifecycle support under its Lifecycle Management Program, and third-party suppliers such as DriveKNMS maintain tested surplus inventory for obsolete variants.

CC Series Full Catalog & Functionalities (SKU List)

The following part numbers represent verified, commonly deployed CC Series modules. Each entry reflects the module's primary functional classification within the Experion PKS I/O subsystem.

Analog Input Modules

  • CC-PAIH01: 8-channel analog input, HART-enabled, 4–20 mA, high-density field termination assembly compatible.
  • CC-PAIH02: 16-channel analog input, HART pass-through, dual-redundancy capable, for high-channel-count marshalling cabinets.
  • CC-TAIX01: Analog input module, standard range, non-HART, for legacy field device integration in brownfield expansions.

Analog Output Modules

  • CC-PAOH01: 8-channel analog output, 4–20 mA, HART-enabled, supports valve positioner feedback loops.
  • CC-PAON01: 8-channel analog output, non-HART, standard current output for non-intelligent field devices.
  • CC-TAOX01: Analog output, standard range, used in temperature and flow control loops.
  • CC-TAOX11: Analog output with extended diagnostics, supports NAMUR NE107 fault classification.
  • CC-GAOX01: General-purpose analog output, compatible with both HART and non-HART field instruments.

Digital Input Modules

  • CC-PDIL01: 32-channel digital input, 24 VDC, for discrete field device status monitoring (valve limit switches, motor run signals).
  • CC-TDIL01: Digital input module, isolated channels, for high-voltage field environments requiring galvanic separation.

Digital Output Modules

  • CC-PDOB01: 32-channel digital output, 24 VDC, solid-state, for solenoid valve and relay actuation.
  • CC-TDOB01: Digital output, relay contact type, for applications requiring dry-contact switching of field devices.
  • CC-SDOR01: Digital output relay module, safety-rated, for use in SIL-rated interlock circuits.

Controller & Counter Modules

  • CC-PCNT01: Pulse counter input module, for turbine flow meters and encoder feedback in rotating equipment monitoring.
  • CC-TCNT01: High-speed counter module, supports frequency measurement up to 100 kHz for high-speed process applications.

Communication & System Modules

  • CC-IP0101: Ethernet communication interface module, provides OPC-DA/UA gateway functionality for historian and MES integration.

Memory & Backup Modules

  • CC-SCMB02 51199942-300: Memory backup assembly for the C300 controller. Maintains controller configuration and runtime data during power interruption. Non-volatile memory architecture. Critical spare for any site operating C300 controllers without redundant power infrastructure. Part number 51199942-300 denotes the specific hardware revision with extended temperature tolerance.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top