Honeywell CC-TAOX01 51308351-175 Analog Output Module – Obsolete C300 Spare Part

Model: CC-TAOX01 51308351-175

Brand Honeywell
Model CC-TAOX01 51308351-175
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell CC-TAOX01 51308351-175 Analog Output Module – Obsolete C300 Spare Part

When a single analog output module fails inside a Honeywell Experion PKS / C300 control system, the downstream consequences are rarely limited to one loop. Process engineers who have lived through an unplanned shutdown know the arithmetic: emergency system migration projects routinely carry price tags in the millions of dollars—engineering hours, new hardware, re-commissioning, lost production, and regulatory re-validation. The CC-TAOX01 is a discontinued module. Honeywell no longer manufactures it. Every unit that remains in circulation is finite. DriveKNMS holds RFQ-reviewed sourcing status of the CC-TAOX01 51308351-175. This page exists because procurement teams and maintenance managers searching for this part deserve a direct answer, not a waiting list.

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Part Number CC-TAOX01 / 51308351-175
Manufacturer Honeywell
Series C300 Controller / Experion PKS
Module Type Analog Output Module
Output Channels 8 channels
Output Signal 4–20 mA
Protocol Support HART
Country of Origin United States
Lifecycle Status Discontinued / Obsolete – No longer in Honeywell production

Solving the Discontinued Hardware Crisis

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.

The CC-TAOX01 sits at a critical junction in the C300 I/O subsystem. It translates controller commands into the 4–20 mA signals that drive control valves, variable-speed drives, and other final control elements. There is no software patch that substitutes for a failed output module. There is no firmware update that restores a burned output channel. The only path to continued operation is a physical replacement unit—and with Honeywell having ceased production, that unit must come from the secondary market.

Factory managers facing system retirement pressure from corporate finance departments should weigh the following: a full DCS migration on a mid-size process unit typically requires 18–36 months of engineering, $2M–$8M in capital expenditure, and a planned shutdown of 2–6 weeks. A replacement CC-TAOX01 sourced from RFQ-reviewed sourcing status extends the operational life of the existing system at a fraction of that cost. For plants with 5–10 years of remaining production life before a planned decommission, maintaining a strategic spare parts inventory is not a workaround—it is the financially defensible strategy.

Condition & Reliability Assurance

Sourcing obsolete hardware from the secondary market carries legitimate quality concerns. DriveKNMS applies a 5-step inspection protocol to every CC-TAOX01 unit before it leaves our facility:

  • Step 1 – Visual Inspection: Full board examination for physical damage, burn marks, corrosion, and pin integrity. Any unit with compromised connector pins is rejected.
  • Step 2 – Electrolytic Capacitor Assessment: Aging electrolytic capacitors are the most common failure point in modules of this generation. Each unit is inspected for capacitor bulging, leakage, and ESR deviation.
  • Step 3 – Firmware Version Verification: The installed firmware version is documented and cross-referenced against known compatible revisions for the C300 platform. Mismatched or corrupted firmware is flagged before dispatch review.
  • Step 4 – Functional Output Channel Test: Each of the 8 output channels is exercised across the 4–20 mA range to confirm signal accuracy and channel isolation.
  • Step 5 – Packaging & ESD Protection: Units are packaged in anti-static bags with foam cushioning. Shipping documentation includes the inspection record and serial number.

Key Features for System Maintenance

Q: How do I know the unit is genuine and not a counterfeit?
A: Every unit we ship carries its original Honeywell labeling and serial number. We document the serial number in the inspection record provided with each shipment. We do not sell relabeled or remarked components.

Q: Can you support multi-unit or repeat RFQ requests?
A: Yes. Send the model list, target quantity and destination so DRIVEKNMS can review sourcing options and quote the requirement as a project RFQ.

Q: Can you source other C300 or Experion PKS components?
A: Yes. DriveKNMS specializes in obsolete and hard-to-find industrial automation components across multiple platforms. Contact us with your full bill of materials.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top