Honeywell TK-FTEB01 51309512-175: Safety Manager Fault-Tolerant Ethernet Bridge Module

Name: Honeywell TK-FTEB01 51309512-175: Safety Manager Fault-Tolerant Ethernet Bridge Module
Brand: Honeywell

Model: TK-FTEB01 51309512-175

Brand Honeywell

Series Pending

Model TK-FTEB01 51309512-175

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell TK Series Technical Notes

The Honeywell TK Series — encompassing the Safety Manager (SM) platform and its associated I/O, communication, and power infrastructure — is one of the most widely deployed safety instrumented system (SIS) architectures in global heavy industry. Installed across petrochemical complexes, LNG terminals, nuclear power facilities, offshore platforms, and refinery process units, the TK Series operates under IEC 61511 and IEC 61508 SIL 3 certification requirements. Its fault-tolerant architecture, redundant backplane communication, and deterministic scan cycle make it the reference standard for high-integrity process shutdown and emergency depressurization systems. The platform's longevity — with installations dating to the early 2000s — means that a substantial installed base continues to operate in brownfield environments where lifecycle extension and spare parts availability are operationally critical.

The Evolution of TK Series Architecture

The TK Series Safety Manager platform was introduced by Honeywell as a successor to the FSC (Fail-Safe Controller) architecture, consolidating safety logic execution, I/O marshalling, and network communication into a unified, IEC 61508-certified framework. Early deployments used the SM Controller (TK-SM01) with dedicated serial-based I/O buses. As Ethernet-based plant networks became standard in the 2000s, Honeywell introduced fault-tolerant Ethernet bridge modules — including the TK-FTEB01 (51309512-175) — to enable high-availability network connectivity without single points of failure. The architecture evolved to support redundant controller pairs, hot-standby I/O modules, and integration with Honeywell's Experion PKS DCS via FTE (Fault Tolerant Ethernet). Compatibility across generations is constrained by firmware revision levels and backplane slot assignments; mixing early-revision and late-revision modules in the same chassis requires validation against Honeywell's compatibility matrix. The TK-FTEB01 itself is a mature product in the late lifecycle phase, with Honeywell transitioning newer installations toward the Safety Manager SC (SMSC) platform — making long-term spare parts support a primary procurement concern for existing TK-based sites.

TK Series Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly deployed modules within the Honeywell TK Series Safety Manager platform. Each entry reflects a discrete hardware function within the system architecture.

Controllers & Processors

TK-SM01 / 51309512-100: Safety Manager main controller module, SIL 3 certified logic solver
TK-SM02 / 51309512-125: Redundant Safety Manager controller, hot-standby pair configuration
TK-CCR01 / 51309512-150: Controller communication and redundancy management module

Ethernet & Communication Modules

TK-FTEB01 / 51309512-175: Fault-Tolerant Ethernet Bridge, dual-port FTE network interface for SM controller integration with Experion PKS
TK-FTEB02 / 51309512-176: Enhanced FTE Bridge module with extended diagnostic capability
TK-MIO01 / 51309512-200: Modbus I/O communication adapter for legacy field device integration
TK-PRG01 / 51309512-210: Programming and configuration port module for SM platform

Digital Input (DI) Modules

TK-DI16D / 51309512-225: 16-channel 24 VDC digital input module, SIL 2/3 rated
TK-DI16A / 51309512-230: 16-channel 120 VAC digital input module for high-voltage field signals
TK-DI08D / 51309512-235: 8-channel 24 VDC digital input, high-density marshalling configuration

Digital Output (DO) Modules

TK-DO16D / 51309512-250: 16-channel 24 VDC digital output module, solid-state relay output
TK-DO08R / 51309512-255: 8-channel relay output module for solenoid valve and actuator control

Analog Input (AI) Modules

TK-AI08 / 51309512-270: 8-channel 4–20 mA analog input module, HART-compatible
TK-AI16 / 51309512-275: 16-channel analog input, high-resolution 16-bit ADC for pressure and temperature transmitters

Power Supply Modules

TK-PS01 / 51309512-300: 24 VDC redundant power supply module for SM chassis
TK-PS02 / 51309512-305: High-capacity power supply for expanded I/O chassis configurations

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.