Honeywell XC5010C CPU Module

Technical Dossier

Product Details And Specifications

Honeywell XC Series Technical Notes

XC Series Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly deployed modules within the Honeywell XC Series platform. Modules are categorized by functional role within the control rack.

CPU / Controller Modules

• XC5010C: Central processing unit; ladder logic execution, I/O bus master, Ethernet supervisory port
• XC5010E: Enhanced CPU variant; expanded program memory, dual Ethernet ports, faster scan cycle
• XC5008C: Standard CPU module; single Ethernet, 8K logic steps, rack bus controller
• XC5008E: Extended memory CPU; supports up to 16K logic steps, redundancy-capable

Digital Input (DI) Modules

• XC-DI16A: 16-channel 24VDC digital input; sink/source configurable, LED status per channel
• XC-DI32A: 32-channel 24VDC digital input; high-density rack mount, common return bus
• XC-DI16H: 16-channel 120VAC digital input; isolated inputs, surge-protected terminals

Digital Output (DO) Modules

• XC-DO16A: 16-channel 24VDC digital output; 0.5A per channel, short-circuit protected
• XC-DO16R: 16-channel relay output; Form C contacts, 2A/channel, 250VAC rated
• XC-DO32A: 32-channel 24VDC digital output; high-density, fused output groups

Analog Input (AI) Modules

• XC-AI08V: 8-channel analog input; 0–10V or ±10V range, 12-bit resolution
• XC-AI08I: 8-channel analog input; 4–20mA loop-powered, 12-bit resolution, HART-ready
• XC-AI16I: 16-channel analog input; 4–20mA, differential inputs, 14-bit resolution

Analog Output (AO) Modules

• XC-AO08I: 8-channel analog output; 4–20mA, 12-bit DAC, loop compliance to 600Ω

Communication / Adapter Modules

• XC-NET01: Ethernet communication adapter; 10/100 Mbps, Modbus TCP gateway function
• XC-PB01: PROFIBUS DP master/slave adapter; up to 12Mbps, 126-node addressing

Power Supply Modules

• XC-PS24A: 24VDC rack power supply; 10A output, wide-range AC input (85–264VAC)
• XC-PS24R: Redundant power supply module; hot-swap capable, load-sharing architecture

Quality Control for the XC Series Range

XC Series modules present specific test challenges due to their integrated backplane bus transceivers and multi-layer PCB construction. DriveKNMS applies a structured test protocol for all XC Series units prior to shipment. Each CPU module (e.g., XC5010C, XC5008C) is bench-powered in a live XC rack chassis to verify boot sequence completion, I/O bus arbitration, and Ethernet port link negotiation. Logic execution is validated using a standardized ladder test program covering timer, counter, and PID function blocks. I/O modules are tested under load: DI modules receive simulated 24VDC field signals across all channels; DO modules drive resistive loads to verify output switching and short-circuit protection; AI modules are calibrated against a traceable 4–20mA reference source; AO modules are verified for linearity across the full output range. Communication modules are tested for protocol handshake and data throughput. All units are inspected for capacitor condition, connector pin integrity, and conformal coating status before packaging.