KUKA 00-245-213 C4 KPP 600-20-3X20 Power Supply – Obsolete KR C4 Spare Part

Technical Dossier

Product Details And Specifications

KUKA 00-245-213 C4 KPP 600-20-3X20 Power Supply – Obsolete KR C4 Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Note: Electrical parameters beyond those listed above are not published here to prevent misapplication. Contact our technical team for full datasheet support before installation.

Solving the Discontinued Hardware Crisis

The KUKA KR C4 controller platform was the backbone of industrial robot deployments throughout the 2010s. Tens of thousands of KR C4 cabinets remain in active service globally, particularly in automotive Tier 1 and Tier 2 facilities where capital expenditure cycles run 10–15 years. The KPP module — part 00-245-213 — is the internal power distribution and management unit within the C4 cabinet. It is not a commodity component that can be substituted with a generic part. Its firmware, communication interface, and physical form factor are specific to the KR C4 architecture.

Extending the operational life of a KR C4 line by 5 to 10 years through strategic spare parts procurement costs a fraction of what a controller migration project demands. A KR C5 retrofit requires new cabinet hardware, updated safety interfaces, re-certification of the safety circuit, and in many cases, re-teaching of robot programs due to kinematic or software differences. For a line of 10 robots, that migration budget routinely exceeds USD 500,000. A stockpile of critical spare modules — KPP, KPS, DSE, and KSP units — can defer that expenditure indefinitely while maintaining full production throughput.

Condition & Reliability Assurance

Obsolete parts sourced from secondary markets carry real risk if the supplier's inspection process is inadequate. DriveKNMS applies a 5-step QA protocol to every KPP unit before it leaves our facility:

• Step 1 – Electrolytic Capacitor Assessment: Capacitor aging is the primary failure mode in power supply modules stored beyond five years. Each unit undergoes ESR (Equivalent Series Resistance) measurement on all primary electrolytic capacitors. Units showing degradation are either recapped with OEM-specification components or rejected.
• Step 2 – Firmware Version Verification: The KPP firmware version must be compatible with the target KR C4 cabinet's software release. We verify and document the firmware revision on each unit and cross-reference against known compatibility matrices.
• Step 3 – Pin and Connector Inspection: Corrosion on the multi-pin connectors of the KPP is a documented field failure cause. Every connector interface is inspected under magnification, cleaned, and treated where necessary. Pins showing mechanical deformation are flagged.
• Step 4 – Functional Power-On Test: Where test bench infrastructure permits, units are powered on and output voltages are verified against specification before dispatch.
• Step 5 – Packaging and ESD Protection: Units are shipped in anti-static packaging with desiccant. Long-term storage units are vacuum-sealed.

Key Features for System Maintenance

Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.

Q: How do I confirm the unit is genuine KUKA and not a counterfeit?
A: Each unit is supplied with its original KUKA part label intact. We provide high-resolution photographs of the label, PCB, and serial number plate prior to shipment upon request. Customers are encouraged to verify the serial number with KUKA's service records where that channel remains accessible.

Q: Can you support multi-unit or repeat RFQ requests?
A: Yes. Send the model list, target quantity and destination so DRIVEKNMS can review sourcing options and quote the requirement as a project RFQ.

Q: Can this unit be used with KR C4 compact or KR C4 NA variants?
A: Compatibility depends on the specific cabinet configuration and software version. Contact our technical team with your cabinet serial number and KUKA System Software (KSS) version before ordering.