PROVIBTECH TM0180 Modules TM0180-A07-B00-C05-D10 Extension Cable

Technical Dossier

Product Details And Specifications

PROVIBTECH TM0180 Series Technical Notes

The PROVIBTECH TM0180 series represents a standardized line of extension cables and signal conditioning accessories engineered for continuous vibration monitoring systems deployed in heavy industrial environments. These components serve as the interconnect layer between proximity probes (eddy-current sensors) and vibration monitoring racks in facilities including petrochemical refineries, nuclear power stations, offshore platforms, LNG terminals, and rotating machinery installations worldwide. The TM0180 series is fully compatible with PROVIBTECH's TM0180 and TM0181 monitor racks and is cross-referenced against Bently Nevada 3300 XL and Emerson CSI series cabling standards, making it a widely specified spare part in multi-vendor DCS environments. Its armored, shielded construction meets IEC 60068 environmental standards for temperature, humidity, and vibration resistance, qualifying it for installation in Zone 1 and Zone 2 hazardous areas under ATEX and IECEx classifications.

TM0180 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly specified configurations within the PROVIBTECH TM0180 extension cable and signal conditioning series. Each entry reflects a distinct functional specification:

• TM0180-A07-B00-C05-D10: Armored extension cable, no barrier, BNC-to-BNC, 10 m length — standard proximity probe interconnect.
• TM0180-A07-B00-C05-D05: Armored extension cable, no barrier, BNC-to-BNC, 5 m length — short-run machine-to-rack connection.
• TM0180-A07-B00-C05-D15: Armored extension cable, no barrier, BNC-to-BNC, 15 m length — extended reach for large turbine pedestals.
• TM0180-A07-B00-C05-D20: Armored extension cable, no barrier, BNC-to-BNC, 20 m length — long-run compressor train installations.
• TM0180-A07-B00-C05-D30: Armored extension cable, no barrier, BNC-to-BNC, 30 m length — remote monitoring panel configurations.
• TM0180-A07-B01-C05-D10: Armored extension cable, Zener barrier compatible, BNC-to-BNC, 10 m — intrinsically safe Zone 1 installations.
• TM0180-A07-B01-C05-D15: Armored, Zener barrier compatible, BNC-to-BNC, 15 m — IS-rated extended reach cable.
• TM0180-A07-B01-C05-D20: Armored, Zener barrier compatible, BNC-to-BNC, 20 m — IS-rated long-run for offshore platforms.
• TM0180-A00-B00-C05-D05: Non-armored extension cable, no barrier, BNC-to-BNC, 5 m — indoor panel-to-rack short run.
• TM0180-A00-B00-C05-D10: Non-armored extension cable, no barrier, BNC-to-BNC, 10 m — standard indoor monitoring loop.
• TM0180-A07-B00-C03-D10: Armored extension cable, no barrier, TNC connector, 10 m — alternative connector for legacy rack terminations.
• TM0180-A07-B00-C03-D15: Armored, TNC connector, 15 m — legacy rack long-run replacement.
• TM0180-A07-B02-C05-D10: Armored, galvanic isolator compatible, BNC-to-BNC, 10 m — high-noise industrial environments.
• TM0180-A07-B02-C05-D20: Armored, galvanic isolator compatible, BNC-to-BNC, 20 m — long-run high-noise loop.
• TM0180-A07-B00-C05-D50: Armored extension cable, no barrier, BNC-to-BNC, 50 m — maximum-length run for distributed machinery monitoring.
• TM0180-A07-B01-C05-D30: Armored, Zener barrier compatible, BNC-to-BNC, 30 m — IS-rated maximum standard run for hazardous area installations.

Quality Control for the TM0180 Range

Each TM0180 extension cable processed through DriveKNMS undergoes a structured verification protocol specific to the electrical and mechanical requirements of eddy-current proximity probe signal chains. Testing procedures include: DC resistance measurement of the center conductor and shield to verify continuity and detect internal breaks; insulation resistance testing at 500 VDC between conductor and shield to confirm dielectric integrity; capacitance-per-meter measurement to validate signal transmission characteristics against OEM specification; connector torque and retention testing to confirm mechanical integrity of BNC or TNC terminations; and visual inspection of armoring, jacketing, and strain relief under 10× magnification. For barrier-compatible variants (B01, B02), additional impedance matching verification is performed to confirm compatibility with the specified barrier type. All test data is logged per serial number and retained for a minimum of five years.