Yokogawa NFBU200-S00 Fieldbus Communication Module – Obsolete CENTUM CS/VP Spare Part

Model: NFBU200-S00

Brand Yokogawa
Series CENTUM CS
Model NFBU200-S00
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Yokogawa NFBU200-S00 Fieldbus Communication Module – Obsolete CENTUM CS/VP Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Part Number NFBU200-S00
Manufacturer Yokogawa Electric Corporation
Country of Origin Japan
Module Type Fieldbus Communication Module (H1 Foundation Fieldbus)
Compatible Systems Yokogawa CENTUM CS 3000, CENTUM VP
Communication Protocol Foundation Fieldbus H1
Discontinuation Status Discontinued / Obsolete – No longer in active production by Yokogawa
Form Factor Plug-in module for CENTUM FCS (Field Control Station) backplane

Note: Electrical parameters not listed here are not independently verified. DriveKNMS does not publish unconfirmed specifications. Contact us for datasheet documentation.

Solving the Discontinued Hardware Crisis

The NFBU200-S00 serves as the communication bridge between the CENTUM FCS and Foundation Fieldbus H1 field devices — flow meters, pressure transmitters, and control valves that have been calibrated and validated over years of operation. Replacing this module with a modern alternative is not a plug-and-swap exercise. It requires segment topology redesign, device descriptor (DD) file re-validation, and in many cases, a full FCS firmware upgrade that cascades into broader system qualification work.

For facilities running CENTUM CS 3000 or early CENTUM VP installations, the NFBU200-S00 is not a commodity item — it is a load-bearing component of a validated control architecture. Procurement teams that treat it as such, and maintain at least one cold-spare unit on-site, consistently avoid the emergency shutdown scenarios that force unplanned capital expenditure.

Facilities that have extended CENTUM CS 3000 system life by 5 to 10 years beyond Yokogawa's end-of-support date share a common practice: they identified the three to five modules with no modern drop-in replacement and secured multi-unit spares before market availability collapsed. The NFBU200-S00 is consistently on that list. Waiting until a failure event to source this module means competing for the same scarce inventory under time pressure — a position that drives both price and risk upward.

Condition & Reliability Assurance

DriveKNMS applies a 5-step inspection protocol to all discontinued modules before dispatch review:

  • Step 1 – Electrolytic Capacitor Assessment: Aging electrolytic capacitors are the primary failure mode in modules stored beyond five years. Each unit is inspected for capacitor bulge, leakage, and ESR deviation. Units with degraded capacitors are quarantined.
  • Step 2 – Firmware Version Verification: The installed firmware version is documented and cross-referenced against known CENTUM CS/VP compatibility matrices. Mismatched firmware versions are flagged before dispatch review.
  • Step 3 – Pin and Connector Inspection: Backplane connector pins are examined under magnification for oxidation, corrosion, and mechanical deformation. Affected units are cleaned or rejected.
  • Step 4 – Functional Bench Test: Where test infrastructure permits, modules are powered and communication link establishment is verified.
  • Step 5 – Packaging and ESD Protection: Units are shipped in anti-static packaging with desiccant to prevent moisture ingress during transit.

Condition grades (New Surplus, Refurbished, or Used-Tested) are disclosed on the invoice. No unit ships without a documented condition grade.

Key Features for System Maintenance

Q: How do I confirm the unit is genuine and not a counterfeit?
A: All units sourced by DriveKNMS are inspected for Yokogawa OEM markings, label integrity, and PCB construction consistency. We provide photographic documentation of the physical unit upon request before purchase.

Q: Should I purchase more than one unit?
A: For any CENTUM CS 3000 or CENTUM VP installation that is not scheduled for decommissioning within three years, holding a minimum of two NFBU200-S00 units as cold spares is a defensible asset protection strategy. Market availability of this module is declining. Procurement cost today is a fraction of emergency sourcing cost during a production stoppage.

Q: Can DriveKNMS source additional units if I need more than one?
A: Contact us with your quantity requirement. We maintain supplier relationships across multiple regions and can advise on availability timelines.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top