Yokogawa SAI143 Modules SAI143-H63/PRP S3

Technical Dossier

Product Details And Specifications

Yokogawa SAI143 Series Technical Notes

The Yokogawa SAI143 series comprises analog input signal conditioner modules deployed within the Yokogawa CENTUM CS 3000 and CENTUM VP distributed control systems (DCS). These modules occupy a critical position in the I/O subsystem of large-scale process automation installations across the global heavy industry sector — including petrochemical complexes, crude oil refineries, nuclear power generation facilities, and liquefied natural gas (LNG) terminals. The SAI143 series handles the conversion and isolation of field-level analog signals (4–20 mA, thermocouple, RTD, and millivolt inputs) into digitized process values consumed by the CENTUM controller nodes. Their high channel density, galvanic isolation architecture, and compatibility with the RIO (Remote I/O) bus make them a standard specification item in engineering procurement for greenfield and brownfield DCS projects. Installed base counts for this series run into the tens of thousands of nodes globally, ensuring sustained demand for spare parts and lifecycle support well beyond the original product discontinuation dates.

The Evolution of SAI143 Architecture

The SAI143 lineage traces to the early CENTUM CS 3000 platform introduced in the late 1990s, where Yokogawa standardized a modular I/O card format for the FCS (Field Control Station) and RIO bus topology. Early SAI143 variants supported basic 4–20 mA current loop inputs with hardware-configured range selection via DIP switches and jumper blocks. As the CENTUM platform matured into the VP generation (circa 2008 onward), the SAI143 series was updated to support software-configurable channel parameters via the CENTUM VP Engineering Environment, eliminating the need for physical reconfiguration during range changes. The /PRP suffix variants introduced PROFIBUS PA and HART pass-through capability, enabling field device diagnostics without dedicated handheld communicators. The H63 hardware revision denotes a specific backplane connector pinout and power rail specification compatible with the RIO node enclosures of the CS 3000 R3 and VP R5/R6 generations. Compatibility between hardware revisions is not guaranteed across major CENTUM platform generations; substitution of SAI143 variants requires verification against the FCS node firmware version and I/O builder configuration. As of 2024, Yokogawa has formally classified the CENTUM CS 3000 platform as end-of-life, transitioning customers to CENTUM VP and the OpreX Control and Safety System portfolio. This lifecycle status elevates the criticality of maintaining SAI143 spare parts inventory for sites that cannot execute a full DCS migration within their current capital planning cycle.

SAI143 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified models within the Yokogawa SAI143 signal conditioner series. Modules are classified by input type and hardware configuration suffix.

Analog Input — Current Loop (4–20 mA)

• SAI143-H00: 16-ch analog input, 4–20 mA, non-isolated, standard RIO bus interface
• SAI143-H01: 16-ch analog input, 4–20 mA, channel-to-channel isolated, CS 3000 compatible
• SAI143-H02: 16-ch analog input, 4–20 mA, HART multiplexer enabled, firmware R2.xx
• SAI143-H10: 16-ch analog input, 4–20 mA, high-density I/O node, VP platform
• SAI143-H11: 16-ch analog input, 4–20 mA, isolated, VP R5 and above
• SAI143-H60: 16-ch analog input, 4–20 mA, H60 backplane revision, RIO node Gen 2
• SAI143-H63: 16-ch analog input, 4–20 mA, H63 backplane revision, RIO node Gen 3, CS 3000 R3 / VP R5–R6

Analog Input — HART / PROFIBUS PA Pass-Through

• SAI143-H63/PRP S3: 16-ch analog input, 4–20 mA with HART/PROFIBUS PA pass-through, H63 backplane, S3 safety classification — primary SKU for this listing
• SAI143-H63/PRP S1: 16-ch analog input, HART pass-through, H63 backplane, S1 standard classification
• SAI143-H63/PRP S2: 16-ch analog input, HART pass-through, H63 backplane, S2 intermediate classification
• SAI143-H02/PRP: 16-ch analog input, HART multiplexer with PROFIBUS PA bridge, CS 3000 R2 compatible

Analog Input — Thermocouple / RTD / mV

• SAI143-H63/TC: 16-ch thermocouple input, J/K/T/E/R/S/B types, H63 backplane
• SAI143-H63/RTD: 16-ch RTD input, Pt100/Pt1000, 2/3/4-wire, H63 backplane
• SAI143-H00/TC: 16-ch thermocouple input, standard backplane, CS 3000 early revision
• SAI143-H00/RTD: 16-ch RTD input, standard backplane, CS 3000 early revision
• SAI143-H10/TC: 16-ch thermocouple input, VP platform, H10 backplane revision
• SAI143-H10/RTD: 16-ch RTD input, VP platform, H10 backplane revision