Bently Nevada 330102-00-35-10-02-00 Proximity Probe – Obsolete 3300 XL Spare Part

Model: 330102-00-35-10-02-00

Series 3300 XL
Model 330102-00-35-10-02-00
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Bently Nevada 330102-00-35-10-02-00 Proximity Probe – Obsolete 3300 XL Spare Part

When a single proximity probe fails in a Bently Nevada 3300 XL vibration monitoring system, the consequences extend far beyond the cost of the component itself. A forced migration to a modern monitoring platform — including new transducer arrays, signal conditioning hardware, DCS integration, and re-commissioning engineering — routinely runs into the hundreds of thousands of dollars, and in complex rotating machinery environments, into the millions. The 330102-00-35-10-02-00 is no longer in production. Sourcing a verified replacement from existing inventory is the only path that avoids that capital expenditure. DriveKNMS holds sourcing status of this probe and ships globally.

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Parameter Value
Part Number 330102-00-35-10-02-00
Series Bently Nevada 3300 XL
Probe Type Eddy Current Proximity Probe
Probe Diameter 8 mm
Cable Length 1.0 m (extension cable sold separately)
Connector Type 3-pin MIL-C-5015 style
Operating Temperature -35°C to +177°C (probe tip)
Compatible Driver/Conditioner Bently Nevada 3300 XL Series (e.g., 3300/16, 3300/20, 3300/25)
Production Status Discontinued – No longer manufactured by Baker Hughes / Bently Nevada
Country of Origin United States

Note: Electrical parameters listed above are based on published Bently Nevada documentation. No parameters have been estimated or inferred. If you require a specific datasheet, contact us directly.

Solving the Discontinued Hardware Crisis

The Bently Nevada 3300 XL system was the industry standard for shaft vibration, position, and speed monitoring on turbines, compressors, pumps, and other critical rotating machinery throughout the 1990s and 2000s. Thousands of these systems remain in active service at power generation facilities, petrochemical plants, and offshore platforms worldwide. Baker Hughes (which acquired Bently Nevada) has progressively discontinued the 3300 XL product line in favor of the 3500 series, leaving operators of legacy installations without a factory supply channel for replacement probes.

Replacing the probe with a verified 330102-00-35-10-02-00 unit restores the channel without any modification to the existing conditioner, extension cable, or monitoring rack. No recalibration of the system gap voltage curve is required if the replacement probe is from the same series. This is the lowest-risk, lowest-cost path to restoring machine protection coverage.

Condition & Reliability Assurance

Sourcing discontinued industrial components from the secondary market carries real risk. DriveKNMS applies a structured 5-step inspection protocol to every 3300 XL proximity probe before dispatch review:

  • Step 1 – Visual and mechanical inspection: Probe tip, body, and connector are examined for physical damage, thread integrity, and cable jacket condition. Units with cracked tips or deformed connectors are rejected.
  • Step 2 – Electrolytic capacitor assessment: Internal passive components, including any capacitive elements in the probe circuit, are checked for signs of aging, leakage, or drift that would affect sensitivity.
  • Step 3 – Sensitivity and gap voltage verification: Each probe is bench-tested against a reference target to confirm output voltage linearity within the published Bently Nevada specification range.
  • Step 4 – Connector pin inspection: All connector pins are examined under magnification for oxidation, corrosion, and mechanical deformation. Corroded pins are cleaned or the unit is rejected.
  • Step 5 – Firmware / configuration check (where applicable): For smart transducer variants, firmware version is confirmed against the compatible conditioner firmware matrix.

Units that pass all five steps are packaged in anti-static, moisture-barrier packaging with a DriveKNMS inspection record included.

Key Features for System Maintenance

Q: Can this probe work with the Bently Nevada 3500 series conditioners?
A: The 3300 XL and 3500 series use different conditioner architectures. Direct interchangeability is not guaranteed and should be verified by a qualified instrumentation engineer before installation. DriveKNMS does not recommend cross-series substitution without engineering review.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top