Bently Nevada 330103-00-03-10-01-00 Proximity Probe – Obsolete 3300 Series Spare Part

Model: 330103-00-03-10-01-00

Series 3300
Model 330103-00-03-10-01-00
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Bently Nevada 330103-00-03-10-01-00 Proximity Probe – Obsolete 3300 Series Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Parameter Detail
Part Number 330103-00-03-10-01-00
Brand Bently Nevada (Baker Hughes)
Series 3300 XL 8mm Proximity Transducer System
Product Type Eddy-Current Proximity Probe
Probe Diameter 8 mm
Cable Length 3m (extension cable dependent on system configuration)
Target Material Compatibility Steel (AISI 4140 / 4340 typical)
Discontinuation Status Discontinued / Obsolete – No longer manufactured by OEM
Country of Origin United States
Compatible Systems Bently Nevada 3300 Series monitors, 3500 Series (with adapter), TDXnet, legacy DCS integrations

Solving the Discontinued Hardware Crisis

The Bently Nevada 3300 XL proximity transducer system was the industry standard for shaft vibration and position measurement on turbines, compressors, pumps, and motors for decades. It is directly integrated into machinery protection systems at facilities running legacy Bently Nevada 3300 Series monitors — hardware that remains operational and structurally sound but is no longer supported by the OEM for new component supply.

The 330103-00-03-10-01-00 probe is a field-replaceable unit within this ecosystem. When it fails, the monitor channel goes offline. Depending on the safety logic configured, this can trigger a machine trip or — more dangerously — leave a critical shaft unmonitored. Neither outcome is acceptable in continuous-process environments.

Facilities that have attempted to substitute non-OEM probes without proper impedance and sensitivity matching have encountered false trip events and calibration drift. The 330103-00-03-10-01-00 is not a commodity sensor. Its electrical characteristics are tuned to the 3300 Series driver/extension cable system. Sourcing the correct part number is a matter of operational safety, not preference.

Condition & Reliability Assurance

All 330103-00-03-10-01-00 units sourced through DriveKNMS undergo a structured 5-step inspection protocol before dispatch review:

  • Step 1 – Electrolytic Capacitor Assessment: Internal circuitry is inspected for capacitor aging, electrolyte leakage, and ESR deviation. Units with degraded capacitors are rejected.
  • Step 2 – Firmware / Configuration Verification: Where applicable, embedded configuration parameters are verified against OEM baseline specifications.
  • Step 3 – Pin and Connector Corrosion Inspection: All connector pins are examined under magnification for oxidation, pitting, and mechanical deformation. Corroded contacts are a primary failure mode in stored legacy parts.
  • Step 4 – Electrical Continuity and Impedance Test: Probe coil resistance and impedance are measured and compared against published 3300 XL system specifications.
  • Step 5 – Functional Output Verification: Where test equipment permits, probe output is verified against a reference target at standard gap distances.

Units that do not pass all five steps are not offered for sale. Condition grade (New / Refurbished-Grade-A) is disclosed on the invoice.

Key Features for System Maintenance

  • Drop-in replacement: The 330103-00-03-10-01-00 installs directly into existing 3300 Series probe mounts without mechanical modification.
  • No reprogramming required: The monitor channel does not require reconfiguration when replacing a like-for-like probe. Calibration verification at the monitor level is recommended but no engineering rework is needed.
  • Avoids system-wide engineering costs: Sourcing this part eliminates the trigger event that forces a full vibration monitoring system upgrade. One probe. One channel restored. Production continues.
  • Compatible with existing extension cables and drivers: The probe is designed to operate within the matched impedance system of the 3300 XL transducer set. No additional interface hardware is required.

How do I verify the part is new or properly refurbished?
Each unit ships with a condition disclosure document. New-in-box units include original OEM packaging where available. Refurbished-Grade-A units include the inspection report from our 5-step QA process.

Can you source matching extension cables and drivers?
Yes. Contact us with your full system configuration and we will advise on available matching components.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top