Bently Nevada 3300 Series Modules – Including 330909-00-60-10-01-05

Model: 330909-00-60-10-01-05

Series 3300
Model 330909-00-60-10-01-05
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Bently Nevada 3300 Series Technical Notes

The Bently Nevada 3300 Series represents one of the most widely deployed vibration monitoring platforms in global heavy industry. Installed across petrochemical refineries, nuclear power stations, offshore platforms, LNG terminals, and rotating machinery facilities, the 3300 Series has served as the backbone of machinery protection systems for decades. Its eddy-current proximity probe technology provides continuous, non-contact measurement of shaft displacement, radial vibration, axial position, and differential expansion — parameters that are operationally critical in high-speed turbomachinery such as steam turbines, gas compressors, and centrifugal pumps.

The installed base of 3300 Series hardware across global industrial facilities is substantial. Many of these systems were commissioned in the 1980s and 1990s and remain in active service. Replacement of the entire monitoring infrastructure is not a routine capital decision — it involves re-engineering cable runs, reconfiguring DCS integration, revalidating alarm setpoints, and retraining operations staff. For plant asset managers, maintaining the 3300 Series with genuine spare parts is the operationally rational choice.

The Evolution of 3300 Series Architecture

The 3300 Series was introduced by Bently Nevada (now a Baker Hughes company) as a modular, rack-based machinery monitoring system. Its architecture centers on the 3300/16 rack, which accepts interchangeable monitor modules, power supplies, and I/O interface cards. This modularity allowed facilities to expand monitoring capacity without replacing the entire rack infrastructure.

Early 3300 Series deployments used analog signal conditioning with 4–20 mA outputs for DCS integration. Later revisions introduced Keyphasor modules for phase-referenced vibration analysis and expanded the probe driver lineup to accommodate different gap ranges and cable lengths. The proximity probe transducer system — comprising the probe tip, extension cable, and proximitor — operates as a matched set, and substituting components from different series (e.g., 3300 XL vs. standard 3300) without recalibration introduces measurement error.

The 3300 XL series emerged as an enhanced variant with improved temperature stability and extended operating range, but it maintains backward compatibility with standard 3300 rack infrastructure in most configurations. As the broader Bently Nevada portfolio has migrated toward the System 1 software platform and 3500 Series rack hardware, the 3300 Series has entered a mature/end-of-life phase. Baker Hughes no longer actively markets 3300 Series components, making third-party sourcing the primary procurement channel for maintenance teams.

3300 Series Full Catalog & Functionalities (SKU List)

The following SKUs represent the core of the 3300 Series product range, organized by functional category. All models listed are genuine Bently Nevada part numbers.

Proximity Probes (Transducer Tips)

  • 330709-00-60-10-02-00: 8mm proximity probe, 60 cm armored cable, standard gap range
  • 330730-040-00-00: 3300 XL 8mm probe, 1m cable, extended temperature rating
  • 330780-50-00: 5mm proximity probe, 50 cm cable, compact installation
  • 330909-00-60-10-01-05: 3300 NSv proximity probe, 60 cm cable, 0.5m extension, standard connector — the subject SKU of this listing
  • 330905-00-12-10-02-00: 3300 NSv 8mm probe, 12 cm cable, short-reach configuration

Extension Cables

  • 330130-045-00-00: 3300 XL extension cable, 4.5m, armored, standard connector
  • 330130-080-00-00: 3300 XL extension cable, 8m, armored
  • 330180-X0-00: Standard 3300 extension cable, various lengths, unarmored

Proximitor Sensors (Signal Conditioners)

  • 330180-91-00: 3300 Proximitor, 5m system, -24 VDC, standard output
  • 330180-X0-CN: 3300 Proximitor, DIN rail mount variant, CE marked
  • 330750-02-00: 3300 XL Proximitor, 5m system, extended temperature
  • 330850-02-00: 3300 XL 8mm Proximitor, 9m system

Monitor Modules (Rack-Mounted)

  • 3300/16: Standard 3300 Series rack, 16-slot, accepts all 3300 monitor modules
  • 3300/20: Dual-channel radial vibration monitor module, 4–20 mA output
  • 3300/25: Dual-channel thrust position monitor, configurable trip setpoints
  • 3300/46: Keyphasor module, phase reference signal conditioning for 3300 rack
  • 3300/55: Dual-channel temperature monitor, thermocouple or RTD input
  • 3300/95: Power supply module, 115/230 VAC input, redundant configuration capable

Sourcing Hard-to-Find & Obsolete 3300 Series Parts

DriveKNMS maintains a dedicated inventory of 3300 Series proximity probes, extension cables, proximitors, and rack modules sourced through controlled industrial channels. Each unit undergoes condition verification before dispatch. We support procurement teams at refineries, power utilities, and chemical plants that require fast-turnaround access to 3300 Series spares without committing to a full system migration.

Quality Control for the 3300 Series Range

The 3300 Series transducer system is a calibrated matched set. Proximity probes, extension cables, and proximitors are factory-calibrated as a system to a defined output scale factor (typically 200 mV/mil or 7.87 V/mm). Mixing components from different calibration sets without recalibration degrades measurement accuracy and can result in false trips or missed alarms.

Our QC process for 3300 Series components includes:

  • Gap voltage verification: Each proximitor is tested against a calibrated target to confirm output scale factor within ±1% of specification
  • Cable continuity and insulation resistance: Extension cables are tested for conductor continuity and insulation resistance to detect internal breaks or moisture ingress
  • Connector inspection: MIL-spec connectors are inspected for pin corrosion, thread damage, and seating integrity
  • Rack module functional test: Monitor modules are bench-tested in a 3300/16 rack with simulated probe inputs to verify alarm relay operation and analog output accuracy
  • Firmware and hardware revision logging: Hardware revision codes are recorded and disclosed to the buyer to confirm compatibility with the target rack configuration

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top