Cognex VPM-8100X-001-P

Technical Dossier

Product Details And Specifications

Cognex VPM-8100 Series Technical Notes

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.

The Evolution of VPM-8100 Architecture

The VPM-8100 platform was introduced as part of Cognex's transition from standalone vision sensors to rack-mounted, multi-camera industrial vision systems. Early iterations of the VPM-8100 relied on PCI-bus image capture cards interfacing with dedicated frame grabber hardware. Subsequent revisions introduced PCI-Express (PCIe) compatibility, expanded camera input counts, and support for GigE Vision and Camera Link interface standards.

The VPM-8100X sub-series introduced extended environmental tolerance ratings and enhanced EMI shielding, targeting installations in electrically noisy environments such as arc welding cells and high-voltage switchgear rooms. Compatibility with legacy VPM-8000 series backplanes was maintained through adapter modules, allowing phased hardware upgrades without full system replacement. As the VPM-8100 series has entered its mature lifecycle phase, Cognex has transitioned active development to the In-Sight and VisionPro ViDi platforms; however, the VPM-8100 remains in active service at thousands of installed sites, creating sustained demand for replacement modules, image capture cards, and interface adapters.

VPM-8100 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly sourced components within the Cognex VPM-8100 series. Each entry reflects a distinct functional role within the platform architecture.

VPM-8100X-001-P: PCIe image capture card, single-channel Camera Link input, primary acquisition module.
VPM-8100X-002-P: Dual-channel Camera Link image capture card, simultaneous stereo acquisition support.
VPM-8100-100: Base image capture card, PCI-bus, single Camera Link port, legacy installations.
VPM-8100-200: Dual-port PCI image capture card, multi-camera synchronization capability.
VPM-8100-300: GigE Vision interface card, 1000BASE-T, supports up to 4 GigE cameras per slot.
VPM-8100-400: Frame grabber module, analog composite input, NTSC/PAL compatible.
VPM-8100-500: Digital I/O expansion module, 24 isolated inputs / 16 outputs, 24 VDC.
VPM-8100-600: Serial communications module, RS-232/RS-422/RS-485 multi-protocol interface.
VPM-8100-700: EtherNet/IP adapter module, Cognex vision system to PLC network bridge.
VPM-8100-800: PROFIBUS DP slave module, fieldbus integration for Siemens and ABB DCS environments.
VPM-8100-900: DeviceNet adapter, Allen-Bradley ControlLogix and CompactLogix compatible.
VPM-8100X-010: Power supply module, 24 VDC regulated, internal backplane feed, 60W rated.
VPM-8100X-020: Redundant power supply module, hot-swap capable, N+1 configuration.
VPM-8100X-030: CPU processing module, Intel Core i5 embedded, VisionPro runtime host.
VPM-8100X-040: CPU processing module, Intel Core i7 embedded, high-throughput inspection host.
VPM-8100X-050: Backplane chassis, 4-slot, passive, compatible with all VPM-8100X modules.
VPM-8100X-060: Backplane chassis, 8-slot, passive, full-rack configuration.
VPM-8100X-070: Camera Link breakout cable assembly, MDR-26 to MDR-26, 2m, shielded.
VPM-8100X-080: Trigger input module, opto-isolated, 5–24 VDC, hardware synchronization.

Quality Control for the VPM-8100 Range

Each VPM-8100 series module processed by DriveKNMS undergoes a structured inspection and functional verification protocol prior to dispatch. Image capture cards including the VPM-8100X-001-P are tested under active PCIe bus enumeration, with camera input signal integrity verified using calibrated Camera Link test sources. Frame timing, pixel clock synchronization, and DMA transfer rates are logged against factory specification sheets.