GE Series 90-70 Modules IC697ADC701

Name: GE Series 90-70 Modules IC697ADC701
Brand: GE Automation & Controls

Model: IC697ADC701

Brand GE Automation & Controls

Series Series 90-70

Model IC697ADC701

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

GE Series 90-70 Technical Notes

The Evolution of Series 90-70 Architecture

The Series 90-70 platform launched commercially circa 1988 under GE Fanuc Automation, a joint venture between General Electric and FANUC Ltd. The original CPU lineup (IC697CPU731, IC697CPU771) used Intel 80386-class processors and communicated via the proprietary Genius Bus (IC660 series field devices). By the mid-1990s, GE Fanuc introduced Ethernet TCP/IP communication modules (IC697CMM742) and expanded the analog I/O catalog to support thermocouple, RTD, and high-speed analog inputs. The platform transitioned through several ownership changes: GE Fanuc → GE Intelligent Platforms (2011) → Emerson Automation Solutions (2018, rebranded as PACSystems). Current Emerson documentation classifies the IC697 Series 90-70 hardware as End-of-Life (EOL), with no new manufacturing. Replacement migration paths include the GE PACSystems RX7i (IC698 prefix), which maintains physical rack and I/O module compatibility with select Series 90-70 modules, enabling phased migration without full system replacement. Compatibility constraints exist between early-generation CPUs (pre-IC697CPU789) and later high-density I/O modules; firmware version alignment is mandatory for mixed-generation rack configurations.

Series 90-70 Full Catalog & Functionalities (SKU List)

CPU & Controller Modules

IC697CPU731: Series 90-70 CPU, 512KB user memory, 80386 processor, Genius Bus master
IC697CPU771: Series 90-70 CPU, 1MB user memory, enhanced instruction set, floating point
IC697CPU781: Series 90-70 CPU, 2MB user memory, expanded I/O capacity, Ethernet-ready
IC697CPU789: Series 90-70 CPU, 6MB user memory, high-speed execution, supports C-block programming

Analog Input Modules

IC697ALG230: 16-channel analog input, ±10V / 4–20mA, 12-bit resolution, single-ended
IC697ALG440: 8-channel analog input, high-resolution 16-bit, differential inputs, RTD/thermocouple compatible
IC697ALG320: 8-channel thermocouple/mV input module, cold junction compensation, 16-bit

Analog Output Modules

IC697ADC701: 12-channel analog output, 12-bit resolution, ±10V / 4–20mA selectable per channel, VMEbus interface
IC697ALG320: 2-channel analog output, high-current drive, 16-bit resolution, isolated outputs
IC697ALG390: 4-channel analog output, 12-bit, 0–20mA / 4–20mA, DIN rail compatible termination

Digital Input Modules

IC697MDL340: 32-channel 24VDC digital input, sink/source configurable, diagnostic per-channel
IC697MDL240: 16-channel 120VAC digital input, optical isolation, group diagnostics
IC697MDL250: 32-channel 120VAC digital input, high-density, optical isolation

Digital Output Modules

IC697MDL940: 32-channel 24VDC digital output, 0.5A per channel, short-circuit protection
IC697MDL753: 16-channel relay output, Form C contacts, 2A per channel, 120/240VAC
IC697MDL654: 32-channel 24VDC output, high-speed switching, diagnostic feedback

Communication & Network Modules

IC697CMM742: Ethernet TCP/IP communication module, 10BaseT, SRTP protocol support
IC697CMM711: Serial communication module, RS-232/RS-485, Modbus RTU/ASCII master/slave
IC697BEM731: Genius Bus master module, supports up to 32 Genius devices per bus

Power Supply Modules

IC697PWR710: 120/240VAC input power supply, 30W output, rack-mount, redundancy-capable
IC697PWR724: 24VDC input power supply, 30W, for DC-powered rack installations

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.