GE DS200ADGIH1AAA Auxiliary Interface Board – Obsolete Mark V Spare Part
General Electric DS200ADGIH1AAA is listed for Mark V RFQ review. Confirm quantity, condition and destination before quotation.
Model: DS200FCRRG1AKD
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The GE DS200 series is a family of printed circuit board assemblies developed by General Electric for use within the Mark V and Mark VI Turbine Control Systems. These systems are deployed across heavy industrial sectors including gas turbine power generation, combined-cycle plants, petrochemical refineries, offshore oil and gas platforms, and nuclear auxiliary control applications. The DS200 platform represents one of the most widely installed turbine control architectures globally, with active installations spanning North America, the Middle East, Southeast Asia, and Europe. Due to the long operational lifespan of gas turbine assets (20–40 years), DS200 series boards remain in active demand for maintenance, repair, and overhaul (MRO) operations long after GE ceased primary production of individual modules.
The DS200 board family was introduced as the hardware substrate for GE's Mark V control platform in the early 1990s, succeeding the Mark IV system. Mark V utilized a triple-redundant TMR (Triple Modular Redundancy) architecture across three control processors — designated , , and — to ensure fault-tolerant turbine operation. Each processor panel was populated with a defined set of DS200 boards covering I/O acquisition, power conditioning, communication, and sequencing logic.
With the introduction of the Mark VI platform in the late 1990s and early 2000s, GE transitioned to a more modular VME-based architecture. Many DS200 boards were redesigned or replaced by IS200 and IS215 series equivalents. However, the DS200 series was not immediately retired from service; instead, it continued to be specified in Mark V retrofit kits and as direct replacement parts for existing installations. By the mid-2010s, the DS200 series entered a formal end-of-life phase, with GE (later GE Vernova) no longer manufacturing new units. This has created a sustained secondary market for tested, refurbished, and new-surplus DS200 boards — a market that DriveKNMS actively supports.
Compatibility note: DS200 boards are not directly interchangeable with IS200 or IS215 series boards without engineering review. Backplane connector pinouts, firmware dependencies, and I/O signal conditioning differ between generations.
The following represents a verified cross-section of the DS200 series module catalog, organized by functional category. All SKUs listed are confirmed members of the DS200 family used within GE Mark V and Mark VI control systems.
Power Supply & Power Conditioning
CPU & Processor Modules
Analog Input (AI) Modules
Digital Input (DI) / Digital Output (DO) Modules
Communication & Interface Adapters
Specialty / Flame Detection & Protection
The DS200 series reached end-of-active-production status progressively between 2008 and 2016. GE's transition to the Mark VIe platform (IS200/IS215 series) rendered the majority of DS200 boards commercially obsolete from the OEM's perspective. However, the installed base of Mark V systems remains substantial, and plant operators face a binary choice: full control system upgrade (capital-intensive, requiring extended outage) or component-level MRO sourcing from the secondary market.
DriveKNMS maintains a dedicated inventory of DS200 series boards sourced from decommissioned turbine control panels, OEM overstock, and authorized refurbishment channels. Each unit is cataloged by full part number including revision suffix (e.g., G1AKD, G5ACB), which is critical for Mark V compatibility verification. We support emergency AOG (Aircraft on Ground equivalent) procurement timelines for power generation customers facing unplanned outages.
DS200 series boards present specific test challenges due to their multi-layer PCB construction, EPROM-based firmware storage, and dependence on backplane bus communication for functional verification. DriveKNMS applies the following test protocol to all DS200 units prior to shipment:
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.