GE Fanuc IS200TBCIS2CCD I/O Terminal Board – Mark VI Redundant Control System
GE Fanuc IS200TBCIS2CCD is listed for Mark VI RFQ review. Confirm quantity, condition and destination before quotation.
Model: DS200TCRAG1ABC
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.
| Part Number | DS200TCRAG1ABC |
| Manufacturer | GE (General Electric) |
| Series | DS200 / Mark VI Turbine Control |
| Component Type | Printed Circuit Board (PC Board) |
| Compatible Platform | GE Mark VI Turbine Control System |
| Country of Origin | United States |
| Production Status | Discontinued / Obsolete |
| Typical Application | Gas turbine, steam turbine, combined-cycle plant control |
The GE Mark VI control system was deployed extensively from the 1990s through the 2010s across power generation facilities globally. Its DS200-series boards — including the DS200TCRAG1ABC — form the backbone of the I/O, communication, and control architecture that keeps turbines synchronized and protected. Because GE has transitioned its turbine control portfolio toward the Mark VIe platform, DS200-series components are no longer manufactured. This creates a structural supply problem: the installed base of Mark VI systems remains large, but the supply of new replacement boards has been exhausted through OEM channels.
For plant managers, this means that a single board failure — caused by electrical surge, capacitor aging, or connector corrosion — can trigger an unplanned outage with no fast OEM resolution path. The DS200TCRAG1ABC is not a commodity item that can be substituted with a generic alternative. Its firmware, backplane interface, and signal conditioning are specific to the Mark VI architecture. Substituting an incompatible board risks control system faults, turbine trips, or safety interlock failures. The only operationally safe solution is a verified, like-for-like replacement from a qualified secondary market supplier.
DriveKNMS specializes in exactly this scenario. Our inventory of DS200TCRAG1ABC units is sourced from decommissioned systems, controlled shutdowns, and OEM overstock — not from unverified brokers. Each unit passes a documented inspection protocol before it is offered for sale.
Obsolete boards sourced from the secondary market carry inherent risk if not properly evaluated. DriveKNMS applies a 5-step QA protocol to every DS200TCRAG1ABC unit before dispatch:
Step 1 – Visual Inspection: Full board surface examination for physical damage, burn marks, cracked solder joints, and component displacement.
Step 2 – Electrolytic Capacitor Assessment: Capacitors are the most common failure point in aged PC boards. Each electrolytic capacitor is tested for capacitance value, ESR (equivalent series resistance), and leakage. Units with degraded capacitors are either recapped or rejected.
Step 3 – Firmware Version Verification: The firmware revision on the DS200TCRAG1ABC is confirmed and documented. Mismatched firmware versions between boards in a Mark VI rack can cause communication faults. We verify compatibility before dispatch review.
Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.
Drop-in Replacement: The DS200TCRAG1ABC is a direct, like-for-like replacement for the same part number within any Mark VI rack configuration. No hardware modification is required.
No Reprogramming Required: Provided the firmware revision matches the existing system configuration, board swap does not require turbine control software re-engineering. This eliminates the need for costly control system integrator involvement for routine board replacement.
Avoids Engineering Reconstruction Costs: A Mark VI to Mark VIe migration project involves new hardware, new I/O termination assemblies, updated HMI software, and full recommissioning. Sourcing a verified DS200TCRAG1ABC spare defers this capital expenditure by years, preserving budget for planned upgrade cycles rather than emergency responses.
Q: How do I verify firmware compatibility before ordering?
A: Provide your existing board's firmware revision label or your Mark VI system software version. DriveKNMS will cross-reference against available inventory and confirm compatibility prior to shipment.
Q: Can you supply multiple units for a long-term spares program?
A: Yes. DriveKNMS supports bulk procurement for facilities building a multi-year maintenance buffer. Contact our team with your required quantity and delivery schedule for a dedicated quotation.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.