GE DS200SLCCG1AEG & DS215SLCCG1AZZ01B Modules - DS215SLCCG1AZZ01B DS200SLCCG1AEG

Model: DS215SLCCG1AZZ01B DS200SLCCG1AEG

Model DS215SLCCG1AZZ01B DS200SLCCG1AEG
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

GE DS200 Series Technical Notes

The GE DS200 Series represents the core I/O and communications infrastructure of the GE Mark VI Turbine Control System — one of the most widely deployed distributed control platforms in global heavy industry. Installed across gas turbine power plants, combined-cycle facilities, petrochemical refineries, offshore platforms, and nuclear auxiliary systems, the Mark VI and its DS200-series boards form the backbone of turbine protection, sequencing, and supervisory control in facilities operating under ISO, IEC, and ANSI standards.

The DS215SLCCG1AZZ01B and DS200SLCCG1AEG are LAN Communications Cards responsible for Ethernet-based data exchange between the Mark VI controller and plant-level SCADA, HMI, and historian systems. These boards operate within the Mark VI's VME-based backplane architecture and are critical to real-time data integrity in continuous-process environments.

The Evolution of DS200 Series Architecture

The DS200 Series was introduced alongside the GE Mark VI platform in the mid-1990s as a modular replacement for the earlier Mark V (DS3800 / DS3820 series) architecture. The Mark V used a proprietary ARCNET-based communication topology; the Mark VI transitioned to a redundant Ethernet (IONet) backbone, enabling higher throughput and deterministic latency for turbine protection loops.

Early DS200 boards (Revision A/B) used ISA-compatible backplane signaling. Subsequent revisions (C onward) introduced enhanced EMI shielding and extended operating temperature ranges to meet IEC 61000-4 immunity requirements for heavy industrial environments. The DS215 sub-series introduced conformal-coated PCBs for corrosive-atmosphere installations (offshore, coastal chemical plants).

By 2010, GE began transitioning customers toward the Mark VIe platform (IS200 / IS215 series), which uses a distributed I/O architecture over EGD (Ethernet Global Data) protocol. However, the installed base of Mark VI systems remains extensive, and DS200-series boards continue to be required for maintenance, life extension, and emergency replacement programs through at least 2035 under GE's long-term parts support commitments.

Compatibility note: DS200 and DS215 boards are not directly interchangeable with IS200/IS215 Mark VIe modules. Backplane connectors, firmware, and I/O addressing differ between generations.

DS200 Series Full Catalog & Functionalities (SKU List)

LAN / Communications Cards

  • DS200SLCCG1AEG: Mark VI LAN Communications Card; manages IONet Ethernet data exchange between controller and HMI/SCADA.
  • DS215SLCCG1AZZ01B: Conformal-coated variant of DS200SLCCG1AEG; rated for corrosive/high-humidity environments.
  • DS200TCQCG1AZZ: Turbine Control Quad-Core Communications board; supports redundant IONet paths.
  • DS200TCDAG1AZZ: Turbine Control Data Acquisition board; interfaces analog sensor inputs to IONet.

CPU / Controller Boards

  • DS200TCPSG1AZZ: Mark VI Turbine Control Processor board; primary CPU for sequencing and protection logic.
  • DS200TCPAG1AZZ: Alternate revision of TCPS; used in earlier Mark VI R-series controller frames.
  • DS215TCPSG1AZZ01B: Conformal-coated TCPS variant for offshore turbine control applications.

Analog Input (AI) Modules

  • DS200IIBDG1ADB: Isolated Input Board; processes 4–20 mA and thermocouple analog inputs for turbine temperature monitoring.
  • DS200TCQAG1AZZ: Quad Analog Input board; four-channel isolated analog acquisition for pressure and flow signals.
  • DS200TCEAG1AZZ: Thermocouple Extension board; expands exhaust temperature monitoring channels.

Digital Input (DI) / Digital Output (DO) Modules

  • DS200DSPXG1AZZ: Digital Signal Processor board; handles discrete I/O for valve position and limit switch feedback.
  • DS200SDCCG1AZZ: Servo Drive Control Card; interfaces electrohydraulic servo valves for fuel and IGV control.
  • DS200GDDDG1AZZ: Generator Protection Digital I/O board; monitors generator breaker and excitation status.

Power Supply Modules

  • DS200PSDAG1AZZ: Mark VI DC Power Supply board; provides regulated 5 VDC and ±15 VDC to backplane modules.
  • DS200PSCAG1AZZ: AC/DC Power Conversion board; converts 120/240 VAC plant supply to controller backplane voltages.
  • DS200TCRAG1AZZ: Turbine Control Relay board; provides hardwired trip relay outputs for emergency shutdown circuits.

I/O Expansion / Specialty Boards

  • DS200EXPSG1AZZ: I/O Expansion board; extends backplane I/O capacity for large turbine configurations.
  • DS200VPBLG1AZZ: Vibration and Position Board; processes proximity probe and accelerometer signals for rotor dynamics monitoring.

Quality Control for the DS200 Series Range

DS200-series boards present specific test challenges due to their VME backplane interface, multi-layer PCB construction, and mixed analog/digital signal paths. DriveKNMS applies the following verification procedures to all DS200 inventory:

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top