GE DS200SLCCG1AEG & DS215SLCCG1AZZ01B Modules - DS215SLCCG1AZZ01B DS200SLCCG1AEG
General Electric DS215SLCCG1AZZ01B DS200SLCCG1AEG is listed for Controller Cards RFQ review. Confirm quantity, condition and destination before quotation.
Model: IC3600TUAA1
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The GE IC3600 series represents the foundational control module platform deployed across GE SPEEDTRONIC Mark I and Mark II gas turbine control systems. These modules have accumulated decades of installed base in heavy industrial environments including petrochemical refineries, offshore platforms, nuclear auxiliary systems, combined-cycle power plants, and LNG processing facilities. The IC3600 backplane architecture uses analog and digital signal conditioning boards that interface directly with turbine sensors, actuators, and protection relay circuits. Due to the long operational lifespan of gas turbine assets — frequently exceeding 30 years — IC3600 modules remain in active demand for maintenance, emergency replacement, and lifecycle extension programs worldwide.
The IC3600 series was introduced as part of GE's SPEEDTRONIC Mark I turbine control platform in the early 1970s. The architecture is built around discrete analog signal processing boards, each performing a dedicated function within the turbine control loop — speed sensing, temperature amplification, fuel control, flame detection, and protection logic. Mark I systems used relay-based logic with analog amplifier boards; Mark II introduced more structured sequencing with improved signal isolation. The IC3600 module form factor remained consistent across both generations, enabling partial retrofits without full system replacement. By the 1990s, GE introduced the SPEEDTRONIC Mark IV (IS200 series) and Mark V (DS200 series) platforms, which replaced IC3600 with microprocessor-based control. However, the installed base of Mark I/II systems in developing markets and legacy power infrastructure has sustained continuous demand for IC3600 spare parts. Compatibility between IC3600 sub-series (TUAA, TCQA, TCEA, TCDA, etc.) is board-specific and must be verified against the original turbine control panel drawing set.
The following SKUs represent verified, commonly sourced modules within the GE IC3600 SPEEDTRONIC Mark I/II control system. Each module performs a discrete function within the turbine control architecture:
IC3600TUAA1: UNI-AMP board; universal analog amplifier for multi-channel signal conditioning in turbine control loops.
IC3600TCQA1: Speed control amplifier board; processes magnetic pickup speed signals for turbine overspeed protection.
IC3600TCEA1: Temperature control amplifier; conditions thermocouple inputs for exhaust temperature regulation.
IC3600TCDA1: Differential amplifier board; used for differential pressure and flow signal processing.
IC3600TCRA1: Reference amplifier board; provides precision voltage reference for analog signal normalization.
IC3600TCSA1: Summing amplifier board; combines multiple analog control signals for fuel valve positioning.
IC3600TPSA1: Power supply board; regulated DC power distribution for IC3600 backplane modules.
IC3600TPLA1: Proportional amplifier board; linear gain amplification for actuator drive signals.
IC3600TBQB1: Bias circuit board; offset adjustment for analog control loop calibration.
IC3600TCCA1: Comparator/control amplifier; threshold detection for alarm and trip logic circuits.
IC3600TCCB1: Secondary comparator board; redundant trip signal processing in protection circuits.
IC3600TPCA1: Pulse counter/amplifier board; processes discrete pulse inputs from turbine shaft encoders.
IC3600TRLA1: Relay logic amplifier board; interfaces analog outputs to relay-based protection sequences.
IC3600TSCA1: Signal conditioning amplifier; general-purpose input conditioning for sensor linearization.
IC3600TTBA1: Terminal board; field wiring termination for IC3600 control panel I/O connections.
IC3600TFCA1: Flame detector amplifier board; processes UV/IR flame scanner signals for combustion monitoring.
IC3600 modules present specific testing challenges due to their analog signal architecture, age-related component degradation, and the absence of OEM test fixtures. DriveKNMS applies a multi-stage inspection protocol for all IC3600 boards: (1) Visual inspection for PCB delamination, burned components, corroded edge connectors, and capacitor failure. (2) Component-level testing of op-amps, precision resistors, and tantalum capacitors against original GE schematic tolerances. (3) Functional bench testing using reconstructed backplane signal environments that replicate Mark I/II panel operating conditions. (4) Signal output verification across the full analog range specified in the GE SPEEDTRONIC maintenance manual. (5) Burn-in testing under thermal cycling to identify latent failures before dispatch. Boards that do not meet original GE specification tolerances are rejected or flagged for repair-only use with full disclosure to the customer.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.