GE IC697MEM715 Memory Module – Series 90-70 PLC
General Electric IC697MEM715 is listed for Series 90-70 RFQ review. Confirm quantity, condition and destination before quotation.
Model: IS200EPDMG1B
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The IS200 module family was introduced alongside the Mark VI control system in the mid-1990s as GE's successor to the Mark V platform. The Mark V relied on a VME-bus architecture with discrete analog and digital I/O boards; the Mark VI transitioned to a triple-redundant (TMR) or simplex architecture using the IS200 card family over a proprietary IONet Ethernet backbone. Early IS200 revisions (suffix A, B) established the baseline electrical specifications — 28 VDC logic power, RS-485 serial backplane communication, and conformal-coated PCBs rated for industrial ambient conditions up to 60°C.
From approximately 2005 onward, GE introduced the Mark VIe platform, which extended the IS200 family with enhanced diagnostic firmware, dual-port Ethernet connectivity (IONet + ENET), and IEC 61850 compatibility for substation integration. Many IS200 modules carry direct Mark VIe equivalents with revised suffix designations (e.g., G1A → G2A → G3A), reflecting firmware and hardware revisions rather than functional redesigns. Backward compatibility between suffix generations is model-dependent and must be verified against GE's IS200 compatibility matrix before substitution.
As of 2026, the Mark VI platform has entered the mature/end-of-active-production phase. GE Vernova (the successor entity post-GE industrial spin-off) continues to offer long-term service agreements (LTSA) for Mark VI installations, but new module production has been substantially curtailed in favor of Mark VIe and Mark VII. This makes third-party MRO suppliers and certified refurbishers the primary sourcing channel for IS200 spare parts in active Mark VI installations.
The following IS200 modules are classified by functional category. All part numbers listed are verified members of the GE Mark VI / Mark VIe IS200 module family.
Exciter & Power Distribution Modules
Exciter I/O & Signal Conditioning Modules
Exciter Communication & Control Modules
IS200 modules present specific test challenges due to their proprietary IONet communication protocol and multi-layer backplane bus architecture. Standard bench power-up is insufficient to validate module health; functional testing requires a Mark VI-compatible rack environment or a dedicated IS200 test fixture that emulates the IONet handshake and backplane signal matrix.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.