GE IS200EXAMG1A Exciter Attenuator Module – Obsolete Mark VI Spare Part

Model: IS200EXAMG1A

Series Mark VI
Model IS200EXAMG1A
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

GE IS200EXAMG1A Exciter Attenuator Module – Obsolete Mark VI Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Attribute Detail
Part Number IS200EXAMG1A
Manufacturer GE (General Electric)
Series / Platform Mark VI Speedtronic Turbine Control
Module Function Exciter Attenuator Module – conditions and attenuates exciter feedback signals within the turbine generator excitation control loop
Compatible Systems GE Mark VI, Mark VI redundant (TMR) configurations; gas turbine and steam turbine generator sets
Discontinuation Status Obsolete – no longer manufactured or supplied by GE
Country of Origin United States
Condition Available New surplus / Professionally refurbished (see QA section)

Note: Electrical parameters such as input/output voltage ranges and signal conditioning specs are unit-specific and verified during our QA process. We do not publish unverified figures. Contact us for test data on the specific unit you are sourcing.

Solving the Discontinued Hardware Crisis

The GE Mark VI platform was the backbone of turbine control for gas-fired power generation and industrial compression throughout the 1990s and 2000s. Thousands of units remain in active service globally — in regions where capital budgets do not support full DCS migration and where the engineering risk of a controls upgrade during peak demand seasons is simply not acceptable.

The IS200EXAMG1A sits within the excitation control chain. Its function — attenuating and conditioning feedback signals from the generator exciter — is not replicated by any off-the-shelf substitute. There is no cross-reference to a current-production equivalent. When this module degrades or fails, the options are: locate a verified spare, or begin a multi-million dollar platform migration under operational pressure.

DriveKNMS specializes in sourcing exactly these components — parts that no longer appear in distributor catalogs but remain operationally critical for assets that are still generating revenue.

Condition & Reliability Assurance

  • Step 1 – Electrolytic Capacitor Inspection: Capacitors in boards of this vintage are the primary failure point. Each unit is inspected for bulging, leakage, and ESR deviation. Aged capacitors are replaced with spec-equivalent components before any unit is offered for sale.
  • Step 2 – Firmware Version Verification: Mark VI modules carry firmware that must match the revision level of the host rack. We document and disclose the firmware revision on every unit so your controls engineer can confirm compatibility before dispatch review.
  • Step 3 – Pin and Connector Corrosion Audit: Edge connectors and backplane pins are inspected under magnification. Oxidation is treated; any unit with structural pin damage is quarantined and not offered for sale.
  • Step 4 – Functional Bench Test: Where test fixtures are available for this module type, units are powered and signal-tested prior to dispatch. Test results are documented and available on request.
  • Step 5 – Anti-Static Packaging and Climate-Controlled Storage: Units are stored in ESD-safe packaging in a climate-controlled warehouse. Shipping uses double-layer ESD protection with shock-absorbing outer packaging.

Key Features for System Maintenance

Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.

Can you source other Mark VI modules?
Yes. DriveKNMS maintains inventory across the Mark VI module family. Contact us with your full BOM or specific part numbers and we will advise on availability.

Q: How are RFQ terms confirmed?
A: Quantity, required condition, documentation needs, destination and sourcing route are confirmed during RFQ review before quotation.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top