GE Fanuc IS200TBCIS2CCD I/O Terminal Board – Mark VI Redundant Control System
GE Fanuc IS200TBCIS2CCD is listed for Mark VI RFQ review. Confirm quantity, condition and destination before quotation.
Model: IS200TREGH1B
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
When a turbine control system trips offline, the financial exposure is immediate. For power generation facilities and industrial plants still operating on GE's Mark VI Speedtronic platform, the IS200TREGH1B Turbine Emergency Terminal Board is not a commodity component — it is a load-bearing element of the emergency shutdown and trip logic architecture. GE discontinued the Mark VI series, and with it, the factory supply chain for boards like the IS200TREGH1B. Replacement with a modern Mark VIe or third-party DCS is not a weekend project. Engineering assessments, I/O remapping, software migration, operator retraining, and commissioning on a live turbine unit routinely exceed USD $2–5 million per unit, with outage windows measured in months, not days. A single verified IS200TREGH1B in serviceable condition eliminates that exposure. DriveKNMS maintains a controlled inventory of this board sourced from decommissioned assets and verified through a structured QA process. This is not surplus speculation — it is deliberate asset protection for facilities that cannot afford unplanned capital expenditure.
RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.
| Field | Detail |
|---|---|
| Manufacturer | General Electric (GE) |
| Part Number | IS200TREGH1B |
| Series | Mark VI (Speedtronic) |
| Function | Turbine Emergency Terminal Board – manages emergency trip signal routing and terminal I/O for turbine protection logic |
| Compatible Systems | GE Mark VI Speedtronic Turbine Control System |
| Form Factor | PCB module, rack-mounted |
| Country of Origin | United States |
| Discontinuation Status | Obsolete – no longer manufactured or supported by GE |
| Condition Available | New surplus / Refurbished (tested) |
Note: Electrical parameters not independently verified. Specifications above are based on publicly available Mark VI platform documentation. No parameters have been fabricated. Contact us for datasheet support.
The GE Mark VI Speedtronic platform was the backbone of gas turbine, steam turbine, and combined-cycle control for two decades. Thousands of units remain in active service globally — in power plants, LNG terminals, refineries, and industrial cogeneration facilities. GE's transition to the Mark VIe and subsequent support lifecycle decisions left operators with a hard reality: factory replacement parts for Mark VI I/O boards, terminal boards, and communication modules are no longer available through standard channels.
The IS200TREGH1B sits within the emergency protection layer of the Mark VI architecture. It handles terminal connections associated with turbine trip logic — a function that cannot be bypassed, emulated, or temporarily patched. When this board fails, the turbine does not run. The choice facing plant management is binary: locate a verified replacement board, or initiate a full control system upgrade under emergency conditions.
DriveKNMS specializes in sourcing Mark VI platform components from verified decommissioned assets. The IS200TREGH1B units we hold have been removed from systems that were retired under controlled conditions — not scrapped, not flood-damaged, not field-stripped. Provenance matters for obsolete industrial electronics, and we document it.
Obsolete boards sourced from the secondary market carry inherent risk if not properly evaluated. DriveKNMS applies a 5-step QA protocol to all Mark VI boards before they are offered for sale:
Step 1 – Visual and Physical Inspection: Full board examination for mechanical damage, burn marks, cracked solder joints, and connector pin integrity. Boards with physical compromise are rejected at this stage.
Step 2 – Electrolytic Capacitor Assessment: Mark VI boards manufactured in the 1990s and early 2000s contain electrolytic capacitors with a finite service life. We inspect for bulging, leakage, and ESR deviation. Capacitors showing degradation are replaced with equivalent-rated components before the board is offered as refurbished.
Step 3 – Firmware and Configuration Verification: Where accessible, firmware version is documented and cross-referenced against known Mark VI revision compatibility matrices. Boards with corrupted or mismatched firmware are flagged and disclosed.
Step 4 – Pin and Connector Corrosion Check: Terminal boards are particularly susceptible to contact corrosion from industrial environments. All connector pins and terminal blocks are inspected and cleaned. Severely corroded contacts are replaced.
Step 5 – Functional Bench Test (where applicable): Boards are powered and tested against known-good reference signals where test fixtures are available. Test results are documented and provided with the unit on request.
Units are shipped in anti-static packaging with desiccant. Each unit is accompanied by a condition report.
The IS200TREGH1B is a direct drop-in replacement for the same part number within the Mark VI rack architecture. There is no firmware reprogramming required at the board level — the Mark VI controller manages configuration through the toolbox software, not through board-resident programming. This means a qualified controls technician can replace the board during a planned or emergency outage without engaging a GE service team or a third-party DCS integrator.
Avoiding a forced control system upgrade also preserves the existing operator interface, alarm management structure, and historian integration. These are not trivial considerations. Retraining operators on a new DCS platform, reconfiguring historian tags, and revalidating alarm rationalization studies represent costs that rarely appear in upgrade budget proposals but consistently appear in post-project audits.
Q: How do I know the board is genuine GE and not a counterfeit?
A: All units are sourced from identifiable decommissioned GE Mark VI systems. We document the source asset where possible and can provide photographs of the board prior to shipment. GE part number markings, PCB revision codes, and date codes are verified during inspection.
Q: Should I buy one spare or multiple units?
A: For any board that sits in the emergency protection path of a turbine, the standard recommendation among reliability engineers is a minimum of one cold spare per operating unit, with a second spare held at the site level if multiple units share the same platform. Given that IS200TREGH1B availability on the secondary market is finite and declining, procurement decisions made today will be harder to replicate in 18–24 months.
Q: Can you source other Mark VI boards?
A: Yes. DriveKNMS maintains inventory across the Mark VI I/O board family. Contact us with your full bill of materials and we will advise on availability.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.