GE IS210 Series Modules IS210AEPSG1AFC IS210AEPSG1

Technical Dossier

Product Details And Specifications

GE IS210 Series Technical Notes

The Evolution of IS210 Architecture

The IS210 hardware family was introduced as part of GE's transition from the earlier Mark V platform (IS200 series) to the Mark VI distributed control system in the late 1990s. The Mark VI architecture introduced triple-redundant I/O (TMR — Triple Modular Redundancy) and dual-redundant (DMR) configurations, with IS210 modules serving as the primary field interface layer. Early IS210 variants used parallel backplane communication; later revisions adopted the IONet serial communication bus, improving noise immunity and diagnostic capability. The EX2100 excitation control system, introduced in the early 2000s, incorporated IS210 modules for generator excitation regulation, replacing the older Analog Voltage Regulator (AVR) designs. Compatibility between IS210 hardware revisions (suffix variants such as A, B, C, AFC, BFC) is not always guaranteed — firmware version, backplane slot assignment, and jumper configuration must be verified before substitution. As of 2026, the IS210 series is in the mature-to-end-of-life phase. GE (now GE Vernova) has transitioned new installations to the Mark VIe platform (IS420 series). However, the installed base of Mark VI and EX2100 systems remains extensive, and OEM support for IS210 hardware has been progressively reduced, making third-party lifecycle support essential for continued plant operation.

IS210 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified, commonly sourced IS210 series modules. Each entry reflects the module's primary functional role within the Mark VI / EX2100 control architecture.

IS210AEPSG1AFC (IS210AEPSG1): Analog/Excitation Power Supply module for EX2100 excitation control systems; provides regulated DC power to excitation I/O boards.

IS210BPPCH1A: Backup Power Protection Card; manages power redundancy switching and fault isolation in Mark VI TMR configurations.

IS210CCCAH1A: Core Controller Card A; primary CPU module for Mark VI simplex and TMR control racks.

IS210CCCBH1A: Core Controller Card B; secondary CPU module used in redundant Mark VI controller configurations.

IS210CVGH1A: Vibration and Speed Input module; processes proximity probe and velocity sensor signals for turbine shaft monitoring.

IS210DSPXH1A: Digital Signal Processor Expansion module; handles high-speed discrete I/O processing for turbine sequencing logic.

IS210ERBPG1A: Ethernet Remote Bus Processor; provides IONet-to-Ethernet gateway functionality for remote I/O communication.

IS210HSLAH1A: High-Speed Link Adapter; interfaces Mark VI controllers with high-speed serial data networks including UDH (Unit Data Highway).

IS210MVRBH1A: Mark VI Voltage Regulator Board; regulates excitation field voltage in EX2100 generator excitation systems.

IS210PDBPG1A: Power Distribution Board; distributes 28VDC and 5VDC logic power across Mark VI I/O racks.

IS210REGPG1A: Regulator Processor module; executes closed-loop PID control algorithms for turbine speed and load regulation.

IS210SBCIH1A: Serial Bus Communication Interface; provides RS-485/RS-232 serial communication links to field devices and HMI systems.

IS210SRTDH1A: RTD (Resistance Temperature Detector) Input module; processes 2-wire, 3-wire, and 4-wire RTD signals for temperature monitoring.

IS210TCPSH1A: Thermocouple Power Supply module; provides excitation current for thermocouple cold-junction compensation circuits.

IS210VAICH1A: Voltage and Analog Input Card; accepts 4–20mA and 0–10VDC analog signals from field transmitters and transducers.

IS210VCRCH1A: Voltage Control and Regulation Card; manages AC voltage regulation feedback loops in EX2100 excitation systems.

IS210VTCCH1A: Voltage and Thermocouple Combination Card; dual-function module accepting both thermocouple and millivolt analog inputs.