Honeywell HC900 Modules 900C30-0460 CPU Processor Module

Name: Honeywell HC900 Modules 900C30-0460 CPU Processor Module
Brand: Honeywell

Model: 900C30-0460

Brand Honeywell

Series Pending

Model 900C30-0460

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell HC900 Series Technical Notes

HC900 Full Catalog & Functionalities (SKU List)

CPU & Controller Modules

900C30-0460: HC900 C30 CPU, 2MB memory, single Ethernet port, up to 4 I/O racks
900C50-0460: HC900 C50 CPU, 4MB memory, dual Ethernet, up to 8 I/O racks
900C70-0460: HC900 C70 CPU, 8MB memory, redundancy-ready, up to 16 I/O racks
900C75-0460: HC900 C75 CPU, enhanced C70 with expanded peer-to-peer links
900RCY-0001: HC900 Redundancy Module, CPU failover synchronization for C70/C75

Analog Input Modules

900G32-0101: 16-channel analog input, 4–20 mA / 0–10 V, 12-bit resolution
900G32-0201: 16-channel analog input with HART pass-through, field device diagnostics
900G16-0101: 8-channel thermocouple/RTD input, multi-sensor type support

Analog Output Modules

900G02-0101: 8-channel analog output, 4–20 mA, 12-bit, loop-powered
900G02-0201: 8-channel analog output with HART, supports valve positioner diagnostics

Digital Input Modules

900G01-0101: 32-channel 24 VDC digital input, sink/source configurable
900G01-0201: 16-channel 120 VAC digital input, optically isolated

Digital Output Modules

900G04-0101: 16-channel 24 VDC digital output, 0.5 A per channel, short-circuit protected
900G04-0201: 8-channel relay output, Form C contacts, 2 A at 120 VAC

Communication & Network Modules

900CS-0001: HC900 Scanner II, remote I/O rack communication adapter, Ethernet-based
900MBM-0001: Modbus Master/Slave communication module, RS-485 and RS-232
900EIM-0001: Ethernet Interface Module, OPC DA server, 10/100 Mbps

Power Supply Modules

900P01-0001: HC900 Power Supply, 100–240 VAC input, 24 VDC / 5 A output, rack-mount
900P02-0001: HC900 Redundant Power Supply, hot-swap capable, for critical process applications

Quality Control for the HC900 Range

HC900 modules present specific test challenges due to their backplane-dependent initialization sequence and firmware version sensitivity. DriveKNMS applies the following verification protocol to all HC900 units: (1) Visual inspection against Honeywell hardware revision matrices to confirm PCB revision compatibility; (2) Powered bench test using an HC900 chassis with a known-good C50 or C70 CPU to verify backplane communication handshake; (3) For CPU modules including the 900C30-0460, firmware version is read and documented — units with firmware below revision 4.x are flagged for customer notification; (4) Analog I/O modules are calibrated against NIST-traceable references at 0%, 25%, 50%, 75%, and 100% of rated range; (5) Communication modules are tested for Ethernet link establishment and Modbus register read/write integrity; (6) All units are packed in anti-static shielding with humidity indicator cards and shipped with full test documentation.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.