Philips PR9350 Inductive Position Sensors PR9350/04

Technical Dossier

Product Details And Specifications

Philips PR9350 Series Technical Notes

The Evolution of PR9350 Architecture

The PR9350 series was developed by Philips Industrial Electronics as part of a broader portfolio of vibration and position transducers designed for rotating machinery protection. Early variants were engineered for direct integration with Philips VM600 and equivalent rack-based monitoring systems, using a two-wire inductive output compatible with standard eddy-current driver electronics. The core sensing element — a precision-wound inductive coil within a stainless steel housing — remained consistent across generations, while connector configurations, cable lengths, and sensitivity ranges were differentiated to address specific OEM and retrofit requirements.

As the industrial automation market consolidated through the 1990s and 2000s, Philips divested its industrial measurement division, and the PR9350 series transitioned through successor ownership. This created a fragmentation in supply chains: original Philips-branded units became progressively harder to source through standard distribution, while the installed base in operating plants continued to demand exact-match replacements to avoid recalibration of monitoring systems. The PR9350/04 specifically represents a mid-range stroke variant with a defined sensitivity coefficient, making cross-substitution with other sub-variants technically inadvisable without system-level reconfiguration. Compatibility with Bently Nevada, Emerson, and Metrix signal conditioning electronics has been validated in field applications, extending the operational relevance of this series beyond its original Philips ecosystem.

PR9350 Full Catalog & Functionalities (SKU List)

The following SKUs represent verified models within the Philips PR9350 inductive linear position sensor series, classified by measurement range, sensitivity, and connector/cable configuration:

PR9350/01: Short-range inductive linear sensor, 4 mm nominal range, standard M12 connector output.
PR9350/02: Extended sensitivity variant, 8 mm nominal range, two-wire inductive output, straight cable exit.
PR9350/03: Mid-range displacement sensor, 12 mm stroke, compatible with Philips VM600 driver cards.
PR9350/04: Inductive linear position sensor, defined sensitivity coefficient, stainless steel housing, IP67, for turbomachinery axial position monitoring.
PR9350/05: Long-range variant, 20 mm nominal stroke, angled cable exit, high-temperature rated to 120°C.
PR9350/06: High-resolution version, sub-micron linearity specification, for precision machine tool and press applications.
PR9350/07: Differential output configuration, dual-coil design, for bridge-circuit signal conditioning systems.
PR9350/08: Compact body variant, reduced OD for space-constrained mounting brackets in compressor housings.
PR9350/09: Extended cable assembly, 5 m integral cable, for remote sensor installations in large turbine enclosures.
PR9350/10: ATEX-rated variant, Zone 1/Zone 2 certified, for use in explosive atmosphere classified areas.
PR9350/11: High-temperature body, rated to 180°C continuous, for steam turbine bearing housing installations.
PR9350/12: Submersible variant, IP68 rated, for below-grade or flooded-cavity measurement points.
PR9350/13: Metric thread body (M14×1.5), direct replacement for legacy European OEM turbine frames.
PR9350/14: UNF thread body (1/2-20 UNF), for North American API-standard machinery installations.
PR9350/15: Extended temperature range variant (-40°C to +150°C), for outdoor and arctic-environment rotating equipment.
PR9350/16: High-sensitivity long-stroke version, 25 mm range, for slow-speed machinery and hydraulic actuator position feedback.
PR9350/17: Dual-output variant with 4–20 mA and voltage output simultaneously, for split monitoring and control system architectures.

Quality Control for the PR9350 Range

The PR9350 series presents specific quality verification challenges due to its inductive sensing principle and the precision of its coil winding and housing geometry. DriveKNMS applies a structured test protocol to all PR9350 units prior to shipment. Inductance measurement is performed at the nominal operating frequency to verify coil integrity and confirm the sensitivity coefficient matches the sub-variant specification. Insulation resistance testing between the sensing coil and the housing ground confirms the absence of moisture ingress or dielectric breakdown — a common failure mode in units recovered from high-humidity environments. Dimensional inspection of the thread form, body OD, and cable exit geometry is conducted against reference drawings to confirm fitment compatibility with the target installation. For ATEX-rated variants (PR9350/10), certification markings and barrier integrity are verified as part of the acceptance checklist. All test data is recorded and supplied with the unit shipment as part of the DriveKNMS quality documentation package.