Siemens 6ES7136-6DB00-0CA0 Electronics Module – Obsolete ET 200SP Spare Part

Technical Dossier

Product Details And Specifications

Siemens 6ES7136-6DB00-0CA0 Electronics Module – Obsolete ET 200SP Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Note: Electrical parameters not independently verified. Specifications above are based on Siemens product family documentation. Buyers are advised to cross-reference against their system documentation prior to installation.

Solving the Discontinued Hardware Crisis

The SIMATIC ET 200SP platform was widely deployed across process industries, automotive assembly, food and beverage, and pharmaceutical manufacturing throughout the 2010s. Many of these installations remain in active production. The 6ES7136-6DB00-0CA0 electronics module sits at the I/O layer of these systems — the point where field signals connect to the controller. When this module fails, the affected I/O station goes offline. Depending on the process, that can mean a single sensor loop or an entire production cell.

For facilities running legacy ET 200SP configurations, maintaining a physical spare of the exact part number is the only strategy that guarantees zero-delay restoration. A like-for-like replacement requires no controller reconfiguration, no GSD update, and no re-commissioning of the I/O station. The line restarts. That is the operational value of holding the correct obsolete spare.

How to extend your ET 200SP-based automation asset life by 5–10 years:

Condition & Reliability Assurance

1. Visual and mechanical inspection: Connector pins examined for corrosion, bending, or contamination. Housing inspected for cracks, burn marks, or evidence of prior field failure.
2. Electrolytic capacitor assessment: Aged electrolytic capacitors are a primary failure mode in stored electronics. Units are assessed for capacitor condition; any unit showing evidence of electrolyte leakage or bulging is rejected.
3. Firmware version verification: Where accessible, firmware revision is recorded and cross-referenced against known compatibility requirements for the ET 200SP platform.
4. Functional power-on test: Units are powered and tested for basic operational response prior to dispatch.
5. Packaging for long-term storage: Units are packed in anti-static materials with desiccant. Storage conditions are documented. Units intended for long-term spare holding are packaged accordingly.