Allen-Bradley 1336-PB-SP23C Printed Circuit Board – Obsolete 1336 PLUS Spare Part

Model: 1336-PB-SP23C

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Allen-Bradley 1336-PB-SP23C Printed Circuit Board – Obsolete 1336 PLUS Spare Part

DriveKNMS maintains RFQ-reviewed sourcing status of this board. Inventory is finite and not replenishable from the original manufacturer.

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Parameter Detail
Part Number 1336-PB-SP23C
Manufacturer Allen-Bradley / Rockwell Automation
Series 1336 PLUS AC Drive
Component Type Printed Circuit Board (PCB)
Product Status Discontinued / Obsolete
Country of Origin United States
Compatible Systems Allen-Bradley 1336 PLUS series AC variable frequency drives
Typical Application Drive control, gate firing, power regulation within 1336 PLUS chassis

Note: Electrical parameters specific to individual drive frame sizes are not published here to prevent misapplication. Contact our technical team to confirm compatibility with your exact drive configuration before ordering.

Solving the Discontinued Hardware Crisis

For plant managers operating facilities built on this infrastructure, the discontinuation creates a structural problem: the drives themselves are mechanically sound and electrically functional, but a single failed PCB — the 1336-PB-SP23C among them — can render an entire drive inoperable. Replacing the drive with a current-generation unit is not a plug-and-play exercise. It requires new parameter programming, potential rewiring, updated PLC logic, and in regulated industries, requalification of the process. The engineering hours alone can cost more than a year of preventive spare parts procurement.

The cost arithmetic is straightforward. A single unplanned production stoppage on a continuous process line — paper, chemical, food processing, metals — can generate losses that exceed the cost of a full spare parts inventory for the entire drive fleet. Procurement of a verified 1336-PB-SP23C spare is not a discretionary expense. It is asset protection.

Condition & Reliability Assurance

Every 1336-PB-SP23C unit processed by DriveKNMS passes a structured 5-step inspection protocol before it is offered for sale:

  • Step 1 – Electrolytic Capacitor Assessment: Aging electrolytic capacitors are the primary failure mode in legacy PCBs. Each board is inspected for capacitor bulging, leakage, and ESR deviation. Boards with degraded capacitors are either recapped with specification-matched components or removed from saleable inventory.
  • Step 2 – Firmware Version Verification: Where applicable, firmware revision is confirmed and documented. Mismatched firmware versions between replacement boards and existing drive configurations are a known source of post-installation faults.
  • Step 3 – Pin and Connector Corrosion Inspection: All edge connectors, terminal pins, and board-to-board interfaces are examined under magnification for oxidation, corrosion, and mechanical damage. Affected contacts are treated or the unit is rejected.
  • Step 4 – Visual and Solder Joint Inspection: Full-board visual inspection for cracked solder joints, damaged traces, burned components, and physical impact damage.
  • Step 5 – Functional Verification: Where test equipment permits, boards undergo powered functional checks prior to packaging.

Key Features for System Maintenance

  • Drop-in Replacement: The 1336-PB-SP23C is a direct form-fit-function replacement for the original board position within the 1336 PLUS drive chassis. No mechanical modification is required.
  • No Reprogramming Required: Drive parameters are stored in separate memory components within the 1336 PLUS architecture. Replacing the PCB does not erase drive configuration in standard installations, eliminating the need for parameter re-entry by a qualified drive technician.
  • Avoids Engineering Reconstruction Costs: Maintaining the existing drive platform preserves the surrounding automation architecture — PLC programs, HMI configurations, interlocks, and process tuning — that would require full reconstruction under a drive replacement scenario.
  • Documented Traceability: Each unit shipped by DriveKNMS is accompanied by inspection documentation, supporting your internal maintenance records and audit requirements.

Q: How do I know the unit is genuine Allen-Bradley and not a counterfeit?
A: All units are sourced through documented supply channels. Board markings, part number silk-screening, and component profiles are verified against known-good reference units. We do not source from unverified secondary markets.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top