Allen-Bradley 2711-B6C2 HMI Terminal – Obsolete PanelView 550 Spare Part

Model: 2711-B6C2

Series PanelView
Model 2711-B6C2
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Allen-Bradley 2711-B6C2 HMI Terminal – Obsolete PanelView 550 Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Parameter Detail
Part Number 2711-B6C2
Brand Allen-Bradley (Rockwell Automation)
Series PanelView 550
Display Size 5.5-inch monochrome
Communication DH-485 / RS-232
Keypad Type Pushbutton
Power Supply AC Input
Product Status Discontinued / Obsolete – No longer manufactured
Typical Legacy System Pairing Allen-Bradley SLC 500, MicroLogix 1000/1500, PLC-5 series
Country of Origin United States

Solving the Discontinued Hardware Crisis

The PanelView 550 series was a standard operator interface across a broad range of discrete manufacturing, food processing, and material handling installations throughout the 1990s and 2000s. Many of these facilities continue to operate the underlying control systems — SLC 500 racks, MicroLogix controllers, and PLC-5 platforms — because the cost and risk of wholesale replacement cannot be justified against current capital budgets.

The 2711-B6C2 communicates natively over DH-485 and RS-232 protocols. These interfaces are not present on current-generation HMI platforms without additional hardware adapters and software reconfiguration. A like-for-like replacement with the 2711-B6C2 requires no changes to the PLC program, no modifications to the communication network, and no revalidation of the operator interface application. Sourcing a verified spare unit is, in most cases, the only rational maintenance decision when the alternative is a six-figure system overhaul.

How to extend your automation asset life by 5–10 years through strategic spare parts management:

Plant managers facing pressure to retire legacy control systems often underestimate the leverage that a small, targeted spare parts inventory provides. A single verified spare of the 2711-B6C2, held on-site, eliminates the primary failure mode that forces unplanned system retirement. The following approach has been applied successfully across facilities in automotive, chemical, and packaging sectors:

Condition & Reliability Assurance

All 2711-B6C2 units dispatched by DriveKNMS pass a documented 5-step inspection protocol developed specifically for legacy HMI hardware:

Key Features for System Maintenance

Drop-in replacement. The 2711-B6C2 installs directly into the existing panel cutout and connects to the existing DH-485 or RS-232 wiring without modification. No re-engineering of the communication network is required.

No reprogramming required. The operator interface application stored on the original terminal can be transferred to the replacement unit using standard RSPanelBuilder software. The PLC program is not affected by the terminal swap.

Avoids engineering reconstruction costs. Migrating from a PanelView 550 to a current-generation platform requires software conversion, network reconfiguration, and in many cases PLC program modifications to accommodate new tag structures. A like-for-like 2711-B6C2 replacement eliminates all of these costs entirely.

Preserves validated process configurations. In regulated industries — pharmaceutical, food and beverage, chemical — replacing an HMI with a different model may trigger revalidation requirements under GMP or FDA 21 CFR Part 11. A direct replacement with the same model number avoids this compliance burden.

Q: How do I confirm the unit is genuine and not counterfeit?
A: All units are sourced from documented industrial asset recovery channels. Serial numbers are recorded and cross-referenced where manufacturer verification tools permit. Units are inspected physically and functionally before dispatch. A condition report is provided with each shipment.

Q: Can you source specific firmware versions?
A: Where multiple firmware revisions are available in current inventory, we will attempt to match the revision specified. Please state your required firmware version at the time of inquiry.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top