Allen-Bradley 2711-K10C15L1
Allen-Bradley PanelView 1000 Color Keypad is listed for PanelView RFQ review. Confirm quantity, condition and destination before quotation.
Model: 2711-K9C1
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The PanelView 2711 series was introduced by Allen-Bradley (subsequently acquired by Rockwell Automation) in the early 1990s as a replacement for earlier pushbutton-based operator panels. The initial architecture centered on monochrome keypad terminals with DH+ network connectivity, targeting SLC 500 and PLC-5 controller environments. Display sizes ranged from 3-inch to 10-inch diagonal, with keypad-only, touchscreen-only, and combination keypad-touchscreen configurations.
The first-generation units used proprietary panel builder software (PanelBuilder 1400e) running on DOS-based workstations. Communication was exclusively via Allen-Bradley Data Highway Plus (DH+) or DH-485 protocols. By the mid-1990s, RS-232 DF1 full-duplex and half-duplex support was added, expanding compatibility to MicroLogix controllers.
The second-generation 2711 units introduced color displays (suffix C in the model number, e.g., 2711-K9C1 vs. 2711-K9A1 for monochrome), improved backlighting, and expanded memory. PanelBuilder 32 replaced the DOS-based software, running on Windows 95/98/NT platforms. This generation also introduced the 2711-T series touchscreen-only terminals alongside the 2711-K keypad series.
The following SKUs represent verified, commonly stocked models within the Allen-Bradley PanelView 2711 series. Each unit is categorized by display type, size, color/monochrome designation, and primary communication interface.
Keypad Terminals — Color Display
Keypad Terminals — Monochrome Display
Touchscreen Terminals
Each 2711 series unit processed by DriveKNMS undergoes a structured inspection and functional verification protocol specific to the HMI platform known failure modes. Common failure points in aged 2711 units include backlight inverter degradation, SRAM battery depletion causing application loss, touchscreen calibration drift (T-series), keypad membrane delamination (K-series), and DH+ ASIC communication faults.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.