ABB NAMC-11C
ABB NAMC-11C is listed for Controller Cards RFQ review. Confirm quantity, condition and destination before quotation.
Model: DSQC639 3HAC041443-003 HDS120 IRB2600 3HAC029896-001
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The ABB DSQC639 series represents a critical component family within ABB Robotics' IRC5 controller platform, deployed globally across heavy industrial environments including petrochemical refineries, nuclear facility material handling systems, automotive body-in-white lines, and offshore platform automation. The DSQC639 (3HAC041443-003) is specifically engineered as a manipulator harness assembly for the IRB2600 robot family, providing the structured wiring backbone for axes 1 through 6. Its counterpart reference 3HAC029896-001 identifies the complete harness kit variant used in customer-specific configurations (HDS120 designation). These components are installed in facilities where robot uptime is measured in years, not months, making spare parts availability a procurement-critical factor.
The DSQC designation (Drive System Quality Control) traces its lineage through ABB's S4, S4C+, and IRC5 controller generations. Early S4-era harness assemblies used discrete multi-pin connectors with limited shielding, making them susceptible to EMI in high-frequency drive environments. The transition to IRC5 introduced the DSQC6xx series, which standardized on M12 and Harting connector formats, integrated signal and power routing into unified harness assemblies, and adopted improved cable jacketing rated for continuous flexing in 6-axis articulated arm applications.
The DSQC639 specifically targets the IRB2600 platform (payload: 12–20 kg, reach: 1.65–1.85 m), a mid-range industrial robot introduced in 2010 and widely adopted through the 2010s. By 2020, the IRB2600 entered its mature/sustained phase, meaning new installations have slowed but the installed base remains large. Harness assemblies such as the 3HAC041443-003 and 3HAC029896-001 are now primarily sourced as maintenance replacements rather than new-build components. Compatibility with IRC5 Single Cabinet and IRC5 Compact controllers has been confirmed across firmware versions from RobotWare 5.x through 6.x.
The following SKUs represent verified components within the ABB DSQC639 / IRB2600 harness and associated IRC5 module ecosystem. Each entry reflects a distinct functional role within the robot control architecture:
3HAC041443-003: Manipulator harness ax 1–6, IRB2600, HDS120 customer config
3HAC029896-001: Manip. harness kit ax 1–6, IRB2600 standard variant
DSQC639: IRC5 axis computer board, 6-axis servo drive interface module
DSQC646: IRC5 I/O module, 24 VDC digital I/O, 16 DI / 16 DO
DSQC647: IRC5 analog I/O module, 4 AI / 2 AO, ±10 V / 4–20 mA
DSQC652: IRC5 digital I/O module, 24 DI / 16 DO, DeviceNet compatible
DSQC658: IRC5 safety module, dual-channel emergency stop and safeguard interface
DSQC662: IRC5 fieldbus adapter, PROFIBUS-DP slave, 12 Mbit/s
DSQC663: IRC5 fieldbus adapter, DeviceNet slave, 500 kbit/s
DSQC667: IRC5 fieldbus adapter, EtherNet/IP adapter module
DSQC668: IRC5 PROFINET IO device adapter
DSQC679: IRC5 teach pendant (FlexPendant) interface board
DSQC688: IRC5 power distribution board, 24 VDC system bus supply
3HAC026254-001: IRB2600 upper arm harness, axes 4–6 signal cable assembly
3HAC026255-001: IRB2600 lower arm harness, axes 1–3 power and signal routing
3HAC026256-001: IRB2600 base harness, controller-to-robot interface cable set
3HAC028357-001: IRB2600 SMB (Serial Measurement Board) battery backup unit
3HAC044168-001: IRB2600 axis 1 motor cable, 7 m standard length
3HAC044169-001: IRB2600 axis 2 motor cable, 7 m standard length
3HAC044170-001: IRB2600 axis 3 motor cable, 7 m standard length
Harness assemblies within the DSQC639 / IRB2600 family present specific inspection challenges due to their multi-conductor construction, continuous-flex cable routing, and mixed signal/power conductor bundling. DriveKNMS applies the following test protocol to all incoming and outgoing units:
Continuity and insulation resistance testing: Each conductor is verified for end-to-end continuity. Insulation resistance between conductors and shield is measured at 500 VDC (minimum 100 MΩ acceptance threshold).
Connector integrity inspection: All M12, Harting, and JST connector housings are inspected under 10× magnification for pin deformation, corrosion, and locking mechanism function.
Flex fatigue assessment: Cable jackets are inspected for micro-cracking, particularly at bend radii near axis 1 and axis 4 pivot points, which are highest-wear zones in IRB2600 installations.
Functional bus communication test: Where applicable, DSQC-series electronic modules are bench-tested against an IRC5 controller reference unit to verify axis computer handshake and I/O register response.
ESD handling compliance: All electronic DSQC modules are handled in ESD-controlled environments (ANSI/ESD S20.20) throughout receiving, testing, and packaging stages.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.