Applied Materials SG25SA / SGMP Series PCB Boards A 10 TTT MKS AS00800-10-1 0190-47445 SG25SA-P01U3 SGMP-01U314M

Technical Dossier

Product Details And Specifications

Applied Materials SG25SA / SGMP Series: Comprehensive PCB Board Range and Technical Overview

The Evolution of SG25SA / SGMP Architecture

Applied Materials' embedded PCB control architecture evolved through several generations tied to platform transitions. Early-generation boards (pre-2000) used proprietary VME-based backplane communication with discrete analog signal conditioning. The SG25SA generation introduced a more integrated approach: onboard FPGA logic, standardized MKS instrument interfaces (RS-232/RS-485), and modular connector schemes that allowed field replacement without full subsystem teardown. The SGMP suffix designates a manufacturing process revision — typically involving component-level changes to address obsolescence of specific ICs or passive components while maintaining full functional and pin compatibility with the predecessor revision. The AS00800-10-1 assembly number is an Applied Materials internal BOM reference; the 0190-47445 is the customer-facing spare part number used in service documentation and procurement. Both numbers reference the same physical assembly. Compatibility extends across multiple tool generations provided the backplane connector and firmware revision are matched. Facilities upgrading from older SG25 to SG25SA must verify firmware compatibility at the host controller level before substitution.

SG25SA / SGMP Full Catalog & Functionalities (SKU List)

The following SKUs represent confirmed Applied Materials PCB assemblies within the SG25SA, SGMP, and closely related control board families. Each entry reflects a distinct functional role within the equipment control architecture.

SG25SA-P01U3: Primary signal processing board, MKS instrument interface, Rev U3
SGMP-01U314M: Manufacturing process revision of SG25SA-P01U3, component-level update
0190-47445: Applied Materials spare part number cross-reference for AS00800-10-1 assembly
AS00800-10-1: Top-level assembly BOM code, SG25SA-P01U3 / SGMP-01U314M board set
SG25SA-P01U2: Predecessor revision to U3; functionally equivalent, earlier component set
SG25SA-P01U1: Initial production revision; limited field compatibility with U3 firmware
SGMP-01U312M: Earlier SGMP manufacturing revision; pin-compatible with 01U314M
0190-40123: Related Applied Materials PCB assembly, SG25 platform analog I/O board
0190-35678: SG25 series digital I/O interface board, 24VDC logic level
0190-52341: SG25SA power regulation sub-board, ±15V / +5V rail output
0190-61892: MKS 647C / 248A instrument communication adapter board
0190-44017: Chamber pressure control interface PCB, SG25SA platform
0190-38904: RF match network control board, compatible with SG25SA backplane
0190-29871: Gas panel solenoid driver board, 8-channel, SG25 series
0190-55203: Endpoint detection signal conditioning board, SG25SA generation
0190-48801: Interlock logic board, SG25SA / SGMP platform, 16-channel input
0190-31456: Temperature control interface PCB, thermocouple input, SG25 series
0190-62774: Host communication gateway board, Ethernet / serial bridge, SG25SA
0190-57390: Diagnostic and test interface board, SG25SA platform