Honeywell CC-P Series Modules: CC-PFE221

Name: Honeywell CC-P Series Modules: CC-PFE221
Brand: Honeywell

Model: CC-PFE221

Brand Honeywell

Series CC-P Series

Model CC-PFE221

RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Submit RFQ Email This Model

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell CC-P Series Technical Notes

The Evolution of CC-P Series Architecture

The CC-P termination assembly series was introduced alongside the Experion PKS platform in the early 2000s as Honeywell's successor to the TDC 3000 and PlantScape control architectures. The initial release established a modular I/O philosophy where termination assemblies (TAs) are physically separated from I/O Link Interface Modules (IOLIMs), enabling field wiring to remain undisturbed during controller or module replacement — a significant operational advantage in live-plant environments.

CC-P Series Full Catalog & Functionalities (SKU List)

Analog Input Termination Assemblies

CC-PFE221: High Level Analog Input TA, 8-channel, non-IS, standard 4–20 mA / 1–5 VDC field input, C300 compatible
CC-PFE111: Low Level Analog Input TA, 8-channel, thermocouple / RTD / mV input, non-IS
CC-PFE401: High Level Analog Input TA, 16-channel, non-IS, high-density marshalling
CC-PDIL01: Discrete Input TA, 24 VDC, 32-channel, non-IS, standard logic input
CC-PDOB01: Discrete Output TA, 24 VDC, 32-channel, non-IS, sourcing output
CC-PAIH01: Analog Input TA, HART-enabled, 8-channel, 4–20 mA with HART pass-through
CC-PAOH01: Analog Output TA, HART-enabled, 8-channel, 4–20 mA with HART pass-through
CC-PAOQ01: Analog Output TA, 8-channel, non-IS, 4–20 mA standard output
CC-PDIL51: Discrete Input TA, 120 VAC, 16-channel, non-IS, AC logic input
CC-PDOB51: Discrete Output TA, 120 VAC, 16-channel, non-IS, AC sourcing output
CC-PDIL61: Discrete Input TA, 240 VAC, 16-channel, non-IS, high-voltage AC input
CC-PDOB61: Discrete Output TA, 240 VAC, 16-channel, non-IS, high-voltage AC output
CC-PFIA01: Frequency/Pulse Input TA, 8-channel, non-IS, flow meter and encoder input
CC-PSIM01: Serial Interface Module TA, RS-232/RS-485, non-IS, serial device integration
CC-PCNT01: Counter/Totalizer Input TA, 8-channel, non-IS, high-speed pulse counting
CC-PDIL11: Discrete Input TA, 48 VDC, 32-channel, non-IS, medium-voltage DC logic input
CC-PDOB11: Discrete Output TA, 48 VDC, 32-channel, non-IS, medium-voltage DC sourcing
CC-PFEIH01: IS High Level Analog Input TA, 8-channel, intrinsically safe, Zone 1/2 rated
CC-PFEOH01: IS Analog Output TA, 8-channel, intrinsically safe, 4–20 mA, Zone 1/2 rated
CC-PDILIH01: IS Discrete Input TA, 24 VDC, 16-channel, intrinsically safe, Zone 1/2 rated

Quality Control for the CC-P Series Range

Each CC-P series termination assembly processed by DriveKNMS undergoes a structured inspection and functional verification protocol specific to the Experion PKS backplane and field wiring interface architecture. Inspection steps include: physical examination of the terminal block assembly and field wiring connectors for corrosion, mechanical damage, and contact integrity; continuity verification across all I/O channels using calibrated test equipment; bus connector pin inspection for the IOLIM interface; and where applicable, HART communication loop verification for HART-enabled variants. Modules with IS certification are additionally verified against their original barrier specifications and zone classification markings. All tested units are documented with a test record and shipped with anti-static packaging compliant with IEC 61340-5-1.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.