Honeywell FSC Series Modules: FC-CPCHAS-0001

Model: FC-CPCHAS-0001

Brand Honeywell
Series FSC Series
Model FC-CPCHAS-0001
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Honeywell FSC Series Technical Notes

The Evolution of FSC Architecture

The FSC platform was introduced by Honeywell (originally developed under the Fail-Safe Controls brand prior to acquisition) in the early 1990s as a dedicated hardware safety controller, distinct from the standard DCS product line. The initial architecture used a 2oo3 (two-out-of-three) voting logic structure implemented across triple-redundant processor modules, with a proprietary backplane bus for inter-module communication.

Generation 1 (1992–1998): Original FC-CPU modules with 8 MHz processor cores, 256 KB application memory, and RS-232-based engineering workstation connectivity. I/O modules used parallel backplane addressing. Chassis options were limited to 8-slot and 16-slot configurations.

Generation 2 (1998–2006): Introduction of the FC-CPCHAS-0001 chassis family with enhanced backplane bandwidth, support for expanded I/O density, and compatibility with the Safety Builder engineering environment. CPU modules upgraded to 32-bit RISC architecture. Ethernet-based workstation connectivity introduced via FC-RCOM communication adapters.

Generation 3 / Modern Maintenance Phase (2006–present): No new FSC hardware revisions have been released. Honeywell transitioned new SIS projects to the Safety Manager (SM) and Safety Manager SC platforms. The FSC series entered a managed lifecycle phase: hardware is no longer manufactured, but Honeywell and authorized third-party suppliers continue to provide spare parts, repair services, and firmware support. Compatibility between Generation 1 and Generation 2 I/O modules and the FC-CPCHAS-0001 chassis is maintained at the backplane level, though CPU firmware versions must be matched to I/O module hardware revisions.

Migration path: Honeywell offers a documented migration procedure from FSC to Safety Manager SC, preserving application logic through Safety Builder export utilities. However, the capital cost and process shutdown requirements mean that a significant portion of the installed base remains on FSC hardware, supported by third-party spare parts suppliers.

FSC Full Catalog & Functionalities (SKU List)

Chassis & Backplane

  • FC-CPCHAS-0001: 19-inch rack chassis, 16-slot backplane, primary FSC system housing
  • FC-CPCHAS-0002: Compact 8-slot chassis variant for reduced I/O count applications
  • FC-CPCHAS-0003: Extended chassis with dual power supply bays and enhanced EMC shielding

CPU / Controller Modules

  • FC-CPU702: Dual-redundant 32-bit RISC CPU, 512 KB application RAM, primary controller module
  • FC-CPU702-0001: CPU702 with extended temperature rating (-20°C to +70°C) for harsh environments
  • FC-CPU702-0002: CPU702 with factory-loaded firmware revision 7.20 for legacy compatibility
  • FC-CPU702-0003: CPU702 with 1 MB extended application memory for large logic programs

Digital Input (DI) Modules

  • FC-SDI-1624: 16-channel 24 VDC digital input, SIL 3 rated, 2oo3 voting capable
  • FC-SDI-1648: 16-channel 48 VDC digital input module with field diagnostics
  • FC-SDI-3224: 32-channel 24 VDC digital input, high-density I/O for large process units

Digital Output (DO) Modules

  • FC-SDO-0824: 8-channel 24 VDC digital output, solid-state relay, SIL 3 rated
  • FC-SDO-0824R: 8-channel relay output variant with mechanical contact isolation

Analog Input (AI) Modules

  • FC-SAI-1620: 16-channel 4–20 mA analog input, HART pass-through, SIL 2 rated
  • FC-SAI-1620H: 16-channel analog input with integrated HART multiplexer for field device diagnostics

Communication & Network Adapters

  • FC-RCOM: Ethernet TCP/IP communication module, Modbus TCP and OPC DA gateway
  • FC-RCOM-0001: RCOM with dual Ethernet ports for redundant network topology
  • FC-PCOM: PROFIBUS DP master/slave communication adapter for DCS integration

Power Supply Modules

  • FC-PSU24-5A: 24 VDC, 5 A redundant power supply module for FSC chassis
  • FC-PSU24-10A: 24 VDC, 10 A high-capacity power supply for fully populated chassis

Sourcing Hard-to-Find & Obsolete FSC Parts

For obsolete or low-volume SKUs, DriveKNMS operates a global sourcing network with access to decommissioned FSC assets from refinery and power generation plant shutdowns. Customers are encouraged to submit full BOM lists for consolidated sourcing quotations.

Quality Control for the FSC Range

FSC modules present specific test challenges due to their safety-rated backplane bus architecture and 2oo3 voting logic implementation. DriveKNMS applies the following verification procedures to all FSC inventory:

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top