Siemens 6ES7143-3BH10-0XA0 Digital Output Module – Obsolete ET 200S Spare Part

Model: 6ES7143-3BH10-0XA0

Brand Siemens
Model 6ES7143-3BH10-0XA0
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Siemens 6ES7143-3BH10-0XA0 Digital Output Module – Obsolete ET 200S Spare Part

DriveKNMS maintains RFQ-reviewed sourcing status of this module. This is not a catalog listing — it is an active inventory position held specifically for facilities that cannot afford the alternative: a full control system migration.

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Parameter Value
Part Number 6ES7143-3BH10-0XA0
Product Family Siemens SIMATIC ET 200S
Module Type Electronic Module – Digital Output
Number of Outputs 4 DO (Digital Outputs)
Output Voltage DC 24 V
Output Current per Channel 0.5 A
Discontinuation Status Discontinued / Obsolete – No longer manufactured by Siemens
Compatible Interface Module IM 151 series (ET 200S)
Country of Origin Germany

Solving the Discontinued Hardware Crisis

The Siemens ET 200S platform was deployed extensively across automotive assembly, food processing, pharmaceutical packaging, and discrete manufacturing facilities throughout the 2000s and 2010s. The 6ES7143-3BH10-0XA0 served as a core output module within these distributed I/O stations, directly controlling actuators, solenoid valves, and relay circuits.

The financially rational decision for most plant managers is straightforward: source verified spare modules, extend the operational life of the existing infrastructure, and defer migration until a planned capital cycle. The 6ES7143-3BH10-0XA0 is the component that makes that strategy viable.

How to extend your ET 200S system life by 5 to 10 years — without a full migration:

Condition & Reliability Assurance

Sourcing obsolete industrial modules from unverified channels introduces risk that is incompatible with production-critical applications. DriveKNMS applies a structured five-step quality process to every unit before it is offered for sale.

  • Step 1 – Visual and mechanical inspection. Each module is examined for physical damage, connector pin condition, and housing integrity. Units with evidence of thermal stress, impact damage, or corrosion on the I/O terminals are rejected at this stage.
  • Step 2 – Electrolytic capacitor assessment. Aged electrolytic capacitors are a primary failure mode in modules that have been stored or lightly used over extended periods. Capacitor condition is evaluated and flagged where replacement is warranted.
  • Step 3 – Firmware version verification. The module firmware is confirmed and documented. Compatibility with the target IM 151 interface module and the customer's STEP 7 or TIA Portal project version is verified prior to shipment.
  • Step 4 – Pin and connector integrity check. All backplane connector pins are inspected under magnification for oxidation, bending, or contamination. Affected pins are cleaned or the unit is rejected.
  • Step 5 – Functional power-on test. Where test infrastructure permits, modules are powered and output channel functionality is confirmed before packaging.

Key Features for System Maintenance

How do I verify the unit condition before purchase?
We provide full condition documentation including inspection records and, where applicable, functional test results. New-in-box units are confirmed with original Siemens packaging. Refurbished units are graded and described accurately — condition is never misrepresented.

Should I purchase more than one unit?
For any facility with more than three ET 200S stations using this module type, holding a minimum of two spare units on-site is the standard recommendation. Open-market availability of discontinued Siemens modules decreases each year. Procurement cost today is lower than emergency sourcing cost in 18 months.

Can you source other discontinued ET 200S modules?
Yes. DriveKNMS specializes in obsolete Siemens SIMATIC components across the S7-300, S7-400, ET 200M, ET 200S, and ET 200SP legacy ranges. Submit your full BOM for a consolidated availability check.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top