Siemens S31043 Rectifier Modules S31043-K1166-X
Siemens S31043-K1166-X is listed for Controller Cards RFQ review. Confirm quantity, condition and destination before quotation.
Model: 6ES7 153-2BA82-0XB0
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The Siemens ET 200M is a modular, rack-based distributed I/O station designed for integration into PROFIBUS-DP and PROFINET networks. It operates as a slave station within Siemens SIMATIC S7 automation architectures and is deployed extensively across global heavy industry sectors including petrochemical refineries, nuclear power facilities, offshore platforms, chemical processing plants, and steel manufacturing. The ET 200M accepts standard S7-300 signal modules directly, making it the preferred distributed I/O platform for engineers maintaining or expanding legacy SIMATIC S7-300 infrastructure. Its high channel density, redundancy capability, and hot-swappable module support under active bus conditions make it a benchmark platform for process-critical installations requiring continuous availability. The IM 153-2 interface module subfamily — including the 6ES7 153-2BA82-0XB0 — provides the PROFIBUS-DP communication backbone for the entire ET 200M station, supporting data rates up to 12 Mbit/s and isochronous mode operation.
The ET 200M platform was introduced in the mid-1990s as Siemens expanded its SIMATIC distributed I/O ecosystem to support PROFIBUS-DP field networks. The IM 153-x interface module series has undergone multiple hardware revisions to address increasing demands for redundancy, isochronous operation, and expanded module slot capacity.
IM 153-1 (6ES7 153-1AA03-0XB0): The original single-master PROFIBUS-DP interface, non-redundant, supporting up to 8 S7-300 modules. Widely deployed in early S7-300 distributed architectures from the late 1990s through mid-2000s.
IM 153-2 Generation 1 (e.g., 6ES7 153-2AA02-0XB0): Introduced active bus module support and redundant PROFIBUS-DP master capability. Enabled hot-swapping of I/O modules without station shutdown — a critical feature for continuous process industries.
IM 153-2 Generation 2 (e.g., 6ES7 153-2BA02-0XB0): Extended slot support to 12 modules, improved isochronous mode compliance, and introduced expanded diagnostics via GSD file revision.
IM 153-2 BA82 (6ES7 153-2BA82-0XB0): Current production variant. Supports up to 12 S7-300 I/O modules, full PROFIBUS-DP V1 and V2 compliance, isochronous mode, redundant DP master operation, and active bus module (IM 153-2 BA82 with BM IM/IM). Compatible with STEP 7 V5.x and TIA Portal engineering environments. This is the recommended replacement for all earlier IM 153-2 variants.
The ET 200M platform is now in a mature/end-of-innovation lifecycle. Siemens positions the ET 200SP and ET 200MP as the strategic successors. However, given the scale of installed ET 200M bases in long-lifecycle process plants, demand for IM 153-2 spare parts — particularly the 6ES7 153-2BA82-0XB0 — remains high through the 2030s. DriveKNMS maintains dedicated inventory and long-term maintenance support for this series.
The following SKUs represent the verified ET 200M interface module and associated active bus module catalog. All models listed are confirmed Siemens part numbers within the ET 200M / IM 153-x product family.
Interface Modules (IM 153-x):
6ES7 153-2BA82-0XB0: IM 153-2 BA82; PROFIBUS-DP V1/V2; redundant DP; 12-slot; isochronous; current production.
6ES7 153-2BA02-0XB0: IM 153-2 BA02; PROFIBUS-DP V1; redundant DP master; 12-slot; predecessor to BA82.
6ES7 153-2AA02-0XB0: IM 153-2 AA02; PROFIBUS-DP; redundant DP; 8-slot; early redundancy variant.
6ES7 153-1AA03-0XB0: IM 153-1; PROFIBUS-DP; single master; 8-slot; non-redundant; legacy variant.
6ES7 153-1AA83-0XB0: IM 153-1 AA83; PROFIBUS-DP; single master; 8-slot; updated firmware revision.
6ES7 153-2BA00-0XB0: IM 153-2; early PROFIBUS-DP redundant interface; 8-slot configuration.
6ES7 153-2BA01-0XB0: IM 153-2 BA01; PROFIBUS-DP; redundant; intermediate hardware revision.
Active Bus Modules (BM IM/IM — for IM 153-2 redundant configurations):
6ES7 195-7HB00-0XA0: BM IM/IM active bus module; enables hot-swap IM 153-2 redundancy; required for dual-IM configurations.
6ES7 195-7HD10-0XA0: BM IM/IM active bus module; updated variant; compatible with IM 153-2 BA82.
6ES7 195-7HB10-0XA0: BM IM/IM; intermediate revision; supports IM 153-2 BA02 and BA82.
Associated Power Supply & Rack Components:
6ES7 195-1GA00-0XA0: IM 153-2 terminating module; required at end of active bus module chain.
6ES7 390-1AE80-0AA0: S7-300 DIN rail profile; 480 mm; standard mounting rail for ET 200M rack assembly.
6ES7 390-1AF30-0AA0: S7-300 DIN rail profile; 530 mm; extended rack configuration.
6ES7 307-1BA01-0AA0: PS 307 power supply; 24 VDC / 2 A; standard ET 200M station power source.
6ES7 307-1EA01-0AA0: PS 307 power supply; 24 VDC / 5 A; high-load ET 200M station power source.
6ES7 368-3BB01-0AA0: Connecting cable for IM 153-2 to S7-300 CPU; 0.5 m; used in local rack extensions.
DriveKNMS operates as a specialist distributor for Siemens SIMATIC automation components, with a dedicated inventory focus on ET 200M interface modules and associated bus infrastructure. For process plants operating on 20–30 year maintenance cycles — refineries, power generation, water treatment — the ability to source discontinued IM 153-x variants without forcing a full station redesign is operationally critical.
The IM 153-2 interface module performs the central communication and backplane arbitration function for the entire ET 200M station. Quality verification for this module class requires protocol-level testing beyond standard power-on checks.
DriveKNMS applies the following test procedures to all IM 153-2 units prior to dispatch:
PROFIBUS-DP Communication Verification: Each unit is connected to a live PROFIBUS-DP segment and verified for correct GSD-based parameterization, data exchange with simulated DP master, and error-free cyclic communication at 1.5 Mbit/s and 12 Mbit/s.
Redundancy Switchover Test: For IM 153-2 BA82 units, active redundancy switchover is triggered under load conditions using a paired BM IM/IM active bus module. Switchover time and data integrity are logged.
Backplane Bus Integrity Check: Module is installed in a verified ET 200M rack and backplane communication to adjacent S7-300 I/O modules is confirmed across all 12 slots.
Firmware Revision Verification: Hardware revision and firmware version are documented and matched against Siemens compatibility matrices for the target STEP 7 or TIA Portal version.
Visual and Connector Inspection: PROFIBUS sub-D9 connector pins, backplane edge connector, and module housing are inspected for mechanical integrity, oxidation, and damage.
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.