Siemens 6ES7214-1BD23-0XB0 PLC CPU Module – Obsolete S7-200 Spare Part

Model: 6ES7214-1BD23-0XB0

Brand Siemens
Model 6ES7214-1BD23-0XB0
RFQ-ready model route Obsolete and surplus sourcing Export follow-up by model list

Product Overview

Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.

Datasheet Preview

Datasheet Preview

Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.

Request Full Manual

Commercial Path

Use This Page To Confirm The Model, Then Move To RFQ

Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.

Technical Dossier

Product Details And Specifications

Siemens 6ES7214-1BD23-0XB0 PLC CPU Module – Obsolete S7-200 Spare Part

RFQ support for obsolete parts: Send the model number, required quantity and destination so DriveKNMS can confirm sourcing options before quotation.

Technical Specifications

Part Number 6ES7214-1BD23-0XB0
Series SIMATIC S7-200
Module Type CPU 224, DC/DC/DC
Supply Voltage 24 V DC
Digital Inputs 14 × DC inputs
Digital Outputs 10 × DC transistor outputs
Integrated Memory 12 KB program / 8 KB data
Expandable I/O Up to 7 expansion modules
Communication Port 2 × RS-485 (PPI/MPI/Freeport)
Discontinuation Status Officially discontinued by Siemens. No direct OEM replacement within S7-200 series.
Country of Origin Germany

Solving the Discontinued Hardware Crisis

The S7-200 platform was deployed across hundreds of thousands of machines globally between the mid-1990s and early 2010s — in packaging lines, water treatment facilities, textile machinery, HVAC control panels, and small-scale process automation. The CPU 224 (6ES7214-1BD23-0XB0) was among the most widely adopted units in that series due to its balance of I/O density and cost.

How to extend your S7-200 asset life by 5–10 years at low cost:

Condition & Reliability Assurance

Sourcing discontinued industrial hardware carries inherent risk. DriveKNMS applies a structured 5-step quality process to every 6ES7214-1BD23-0XB0 unit before it leaves our facility:

  1. Visual & Physical Inspection: Full examination of housing integrity, connector pins, and PCB surface. Units with evidence of burn marks, cracked housings, or corroded terminals are rejected at intake.
  2. Electrolytic Capacitor Assessment: Aged S7-200 CPUs are susceptible to electrolytic capacitor degradation — a failure mode that causes intermittent faults before complete failure. Capacitors are inspected for bulging, leakage, and ESR deviation.
  3. Firmware Version Verification: The installed firmware version is documented and disclosed. Compatibility with specific Micro/WIN versions and expansion modules is confirmed where applicable.
  4. Functional Power-On Test: Each unit is powered and tested for normal boot sequence, communication port response, and I/O channel integrity.
  5. Pin & Contact Corrosion Check: RS-485 ports and expansion bus connectors are inspected under magnification. Contact surfaces are cleaned and verified for proper electrical continuity.

Units are classified as New (sealed OEM), Refurbished (tested, cleaned, re-certified), or Used (tested, as-removed). Condition is disclosed in full at the time of quotation.

Key Features for System Maintenance

  • Drop-in replacement: The 6ES7214-1BD23-0XB0 is a direct hardware substitute for any failed CPU 224 DC/DC/DC unit. No wiring changes, no I/O remapping.
  • No reprogramming required: Restore your archived project file via Micro/WIN. The replacement CPU accepts the existing program without modification, provided the firmware version is compatible.
  • Avoids engineering reconstruction costs: Unlike a platform migration, a like-for-like CPU replacement keeps your existing HMI, field devices, and communication network intact. Engineering cost is limited to the time required to restore and verify the program.
  • Preserves validated process logic: In regulated industries (food & beverage, pharmaceutical, water treatment), re-validation of a migrated control system is a significant compliance burden. A direct replacement avoids triggering re-validation requirements.

Q: How is condition confirmed before quotation?
A: Available condition, photos, test records and documentation are checked according to the requested model and sourcing channel before a formal RFQ response.

Should I buy more than one unit?
For any S7-200-dependent line with no planned migration in the next 3–5 years, holding a minimum of two spare CPUs is the standard recommendation. The global supply of 6ES7214-1BD23-0XB0 units is finite and declining. Prices for RFQ-reviewed sourcing status will not decrease over time.

Continue The Model Path

Use system, brand and series routes to compare related published models.

Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.

WhatsApp Prefilled Inquiry Email sale@driveknms.com Phone +86 18359293191 Top Back To Top