Siemens S31043 Rectifier Modules S31043-K1166-X
Siemens S31043-K1166-X is listed for Controller Cards RFQ review. Confirm quantity, condition and destination before quotation.
Model: 6ES7507-0RA00-0AB0
Product Overview
Commercial availability is handled through direct RFQ, model verification and export-oriented follow-up rather than public cart checkout.
Datasheet Preview
Use attached product manuals when available. If the manual is not public yet, request the full file directly through RFQ.
Commercial Path
Product pages on DRIVEKNMS are designed to verify model, brand and series first, then move the buyer into one clean quotation path.
Technical Dossier
The Siemens SIMATIC ET 200SP IM 507 (Interface Module 507) is the central communication backbone of the ET 200SP distributed I/O system, one of the most widely deployed remote I/O platforms in global heavy industry. Installed across petrochemical complexes, nuclear power auxiliary systems, offshore platforms, and continuous-process refineries, the ET 200SP system — anchored by the IM 507 interface module — provides PROFINET-based distributed I/O connectivity to SIMATIC S7-1500 and S7-1500F controllers. Its compact rail-mount form factor, high channel density, and deterministic cycle times make it the reference architecture for process automation engineers specifying new DCS/PLC hybrid topologies. The IM 507 specifically enables the ET 200SP station to operate as a PROFINET IO device, supporting up to 32 I/O modules per station and providing integrated diagnostics, isochronous mode, and shared device functionality.
The ET 200SP platform was introduced by Siemens in 2012 as the successor to the ET 200S series, addressing the demand for higher packing density and reduced wiring complexity in distributed I/O applications. The IM 507 interface module family was developed specifically to serve as the PROFINET IO device head for ET 200SP stations connected to S7-1500 CPUs.
Early IM 507 variants (circa 2013–2015) supported standard PROFINET IO with RT (Real-Time) communication. Subsequent hardware revisions introduced IRT (Isochronous Real-Time) support, enabling sub-millisecond cycle synchronization required in motion-integrated process lines. The 6ES7507-0RA00-0AB0 variant supports PROFINET IO with RT and IRT, shared device operation (up to two IO controllers), and integrated web server diagnostics — features that were progressively added through firmware generations.
Compatibility considerations are critical for maintenance engineers: IM 507 modules require BaseUnit BU type A0 (6ES7193-6BP20-0DA0 or equivalent) and are not interchangeable with ET 200SP IM 155-6 PN modules without reconfiguration in TIA Portal. Firmware version alignment between the IM 507 and the S7-1500 CPU is mandatory; mismatched GSD file versions are a documented source of station startup failures in brownfield installations.
Interface Modules (IM 507 Family)
Digital Input Modules (DI)
Digital Output Modules (DO)
Analog Input Modules (AI)
Analog Output Modules (AO)
Technology & Communication Modules
Power / BaseUnit Modules
ET 200SP IM 507 modules present specific test challenges due to their integrated PROFINET ASIC, backplane bus controller, and multi-channel diagnostic logic. DriveKNMS applies a structured verification protocol for all IM 507 units prior to dispatch:
Continue The Model Path
Move from this exact model into the matching system hub, brand archive, model-family archive or lifecycle sourcing route before sending a final RFQ list.